DRAIN DEFENDER 860002651002 Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DRAIN DEFENDER 860002651002. DRAIN DEFENDER 860002651002 2 pagina's.

Keeps drains flowing
DRAIN DEFENDER
USER'S GUIDE
TM
Thank you for choosing DRAIN DEFENDER
. This guide will assist
you in proper installation and care of this innovative new product
that prolongs the proper flow of water through outdoor and indoor
pipe drains when leaves, grass, or other debris might otherwise lead
to clogging and expensive flooding. With proper maintenance,
TM
DRAIN DEFENDER
can save you thousands of dollars and hours of
aggravation. Please follow the instructions in this guide to achieve
optimum performance.
TM
WARNING: DRAIN DEFENDER
can pose a tripping hazard that can lead to serious injury. DRAIN
TM
DEFENDER
is not intended for usage in areas where daily foot traffic is expected, or in areas
where the elderly or young children may be present.
WARNING: With proper care, DRAIN DEFENDER
clogs and flooded basements, while reducing your overall drain cleaning maintenance costs.
Failure to properly maintain your DRAIN DEFENDER
performance of the device. It's important to follow the maintenance and cleaning instructions
that follow to ensure proper operation and optimum performance.
INSTALLATION
TM
DRAIN DEFENDER
does not require any tools to install.
TM
1)
Before installing Drain Defender
, remove any leaves, grass or other debris from the area around the
drain. Use a garden hose to check whether the drain flows well when debris is not present. Proper
flow can be impeded by clogging inside the drain pipe, root penetration, or other issues that can't be
TM
improved by Drain Defender
. Contact a qualified professional if the water drains slowly.
2)
Remove the outer SHELL and the inner STRAINER from the box. Be sure the center hub of the
STRAINER is pressed firmly onto the center post of the SHELL as shown:
SHELL STRAINER
TM
TM
can greatly reduce the chances of pipe drain
TM
and the surrounding drain area can impair
3) Place the assembly over the drain, inserting the GUIDE PIN on the bottom of the
STRAINER into one of the drain holes or slots close to the center of the drain grate.
SHELL
EXISTING
DRAIN
GRATE
NOTE: It's acceptable for the DRAIN DEFENDER
slots in the drain grate close to the center of the grate, cut the GUIDE PIN off with cutters or scissors,
and position the assembly approximately over the center of the drain grate.
WARNING:
The STRAINER is made from a flexible material to accommodate uneven surfaces
surrounding the drain grate. DRAIN DEFENDER
significant steps or misalignment of the concrete or surrounding material caused by to cracking and
displacement of the surface.
CLEANING AND MAINTENANCE
WARNING:
Failure to properly maintain your DRAIN DEFENDER
can seriously impair performance, and lead to unwanted clogging and flooding. It's important to
follow these CLEANING AND MAINTENANCE instructions to ensure proper operation and optimum
performance.
1) Periodically remove the DRAIN DEFENDER
the SHELL by grasping the GUIDE PIN and pulling the STRAINER free.
2) Use a garden hose to spray any collected debris from the SHELL and the STRAINER.
If debris has hardened due to exposure and is difficult to remove, soak both the SHELL and
the STRAINER in water until softened, then spray as needed to remove from holes and slots.
Scrub as needed with a soft brush.
3) Sweep and remove any leaves, grass, pine needles, or any other debris that may have collected in the
drain area and any adjacent stairwell.
4) Press the STRAINER back onto the center post on the underside of the SHELL, and return the
assembly to service as described in the INSTALLATION section of this User's Guide.
NOTE: Over time, the STRAINER may no longer fit tightly to the SHELL, or may show signs of deterioration
that may lead to poor performance. Visit the draindefender.com website to order a replacement STRAINER.
Questions? E-mail us at [email protected]
For information on our LIMITED WARRANTY, please visit www.draindefender.com
GUIDE
PIN
TM
to be slightly off-center. If there are no holes or
TM
performance may be seriously impaired if there are
TM
and the surrounding drain area
TM
assembly from the drain. Separate the STRAINER from