Advanced Elements Firefly AE1020 Gebruikershandleiding - Pagina 10
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Advanced Elements Firefly AE1020. Advanced Elements Firefly AE1020 20 pagina's. 1 or 2 person kayak
Ook voor Advanced Elements Firefly AE1020: Gebruikershandleiding (16 pagina's)
Pagina afdrukken
TM
Diagram of Inflation Chambers
3.3 Inflating
IMPORTANT: Inflate your kayak in the following order. Failure to follow these instructions
may cause damage to your kayak. Do not over inflate. Be sure to read directions on
operating the spring valves and twist valves located in the section "Understanding your valves".
Before inflating please be sure that the foam floor is positioned inside the kayak seating area,
underneath the side inflation tubes. When the kayak is inflated it will hold the foam floor in
place.
1. Inflate chamber 1 "main1" until the kayak looks about half way inflated.
2. Inflate chamber 2 "main2" until the kayak feels firm to touch. There should be just a few
wrinkles visible on the side GRAY TUBE COVERS.
3. Inflate chambers 3 and 4 "deck lift tubes" until firm.
4. Inflate chambers 5,6,7,8 until firm.
5. Inflate seat cushion to desired firmness and attach to kayak using provided strap.
6. Make sure all valves are closed tightly and properly.
NOTE: Ideally you want to put about half of the air in Chamber 1 and half into chamber 2. This
way if you were to loose pressure in one chamber then you would have the other chamber to
float the kayak.
10