Drain Master CE50 Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Drain Master CE50. Drain Master CE50 15 pagina's. Electric drain cleaner

Electric Drain Cleaner - CE50

Working Through Blockages and Preventing Cable Twist

If the cutting tool becomes lodged and the cable is still rotating, the cable will start to

twist – release the foot switch to stop the motor immediately to help prevent

damaging the cable (the cable drum may rotate backwards somewhat as tension in the cable releases).

Ensure that the tool and/or cable is dislodged before continuing to use the machine. • Do not let the cable

build up outside drain. • Do not wind in the cable if it is twisted or under tension. • While working through

obstructions, the tool and cable can get clogged with debris, preventing further cleaning. If this occurs, retract

the cable and tool and clear them before continuing.

If the cutting tool becomes lodged or embedded in an obstruction, it will not cut and must be dislodged

before continuing. If the cable continues to rotate when the cutting tool is lodged, the cable will quickly twist

and kink, which may create a hazard and/or damage the cable.

What to do if the cutter gets lodged:

1. Release the foot switch IMMEDIATELY to prevent the cable being further driven and rotated.

2. Place the motor switch in the "REV" position and activate it using the foot switch to dislodge the cable by

rotating it in reverse. Pulsing the motor slightly may also assist in dislodging the cutter. When the cutter

is dislodged, the cable should be able to rotate freely. If using the motor cannot dislodge the cutter,

release the foot switch, switch the machine OFF, then grasp the cable with gloved hands and pull it free.

Once the tool is free of the blockage and the cable is able to rotate freely, attempt to clear the obstruction

again. You may have to repeat this several times in order to clear the obstruction.

Once the drain is clear, turn on the tap or use a hose to flush debris through the drain and check for further

blockages or obstructions. If the water flow slows or stops, indicating a further obstruction or blockage,

resume clearing the drain.

Do not retract the cable with the motor switch in the "REV" position. • Do not pull the cable

from drain while it is rotating – the cable can whip, causing serious injury.

•

Place the motor switch in the "OFF" position, dry your hands, then disconnect the machine from the

electrical supply.

•

Grasp the cable with gloved hands and pull it from the drain, and feed into the cable drum.

E&OE