Draper 230135 Snelstarthandleiding
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Draper 230135. Draper 230135 2 pagina's. Portable
Pagina afdrukken
220V Ultimate Access by Draper
Please Note: Do not wire motors in parallel.
Junction box at
left end of screen
See separate Serial Communication-RS232 Instruction sheet for enabling RS232 with the MC1.
Wiring Diagrams
Single Station Control
CE Approved
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Control
switch
Dashed wiring
by installer
220v,
50 Hz.
Low Voltage & Wireless Control
White or Blue-Common to screen & 110/220V AC Neutral
Red-to screen (directional)
Brown-to screen (directional)
Yellow-to 110/220V AC-Hot
Black-to 110/220V AC-Hot
Green/Yellow (Ground)
Eye Port for IR Eye, RF Receiver or LED
Wall Switch. For more than one of
these, a splitter is required.
3 Button Wall Switch
DOWN - Black
COM - White
UP - Red
Aux Port for connecting additional LVC-III
modules (up to six total can be linked-
connect from Aux to Eye).
White or Blue-Common
Red-to Screen (directional)
Black-to Screen (directional)
Brown-Hot to AC
Program LED
Green/Yellow-Ground
Fuse
RS232 Data FROM Control System
RS232 Data TO Control System
Signal Ground & Manual Switch Common
Manual Switch Down
Manual Switch Up
Eye Port for IR Eye. For RF Receiver or LED
MC1
Wall Switch, a Splitter and a Power Supply
is required. Plug RF Receiver or LED Wall
Switch and Power Supply into splitter, then
run cable from Splitter to MC1 Eye Port.
www.draperinc.com
Multiple Station Control
Junction box at
Not CE Approved
left end of screen
Internal Screen Wiring
Blue-220v (Common)
Brown-220v (Down)
Black-220v (Up)
Green/Yellow (Motor Ground)
Red
Black
Red
Black
Red
Black
Dashed wiring
by installer
220v, 50 Hz.
Dashed wiring by electrician
Low voltage wiring by others
STOP
STOP
Control
Switches
24v DC
MC1
Low Voltage Wiring by others
AC Wiring by electrician
Location of key
operated on-off
switch if furnished
To AC Line
(765) 987-7999
Cap off with wire
nut & tape
Blue
Blue
Blue
Internal Screen Wiring
White/Blue (Common)
Red 110/Black 220 (Up)
Black 110/Brown 220 (Down)
Green/Yellow
(Motor Ground)
To
110/220V
Line
Location of key
operated on-off
switch if furnished
Internal Screen Wiring
White/Blue (Common)
Red 110/Black 220 (Up)
Black 110/Brown 220 (Down)
Green 110V/
Green/Yellow 220V
(Motor Ground)
Page 4 of 4