Draper Lace & Grommet Installatie- en bedieningsinstructies - Pagina 2
Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Draper Lace & Grommet. Draper Lace & Grommet 4 pagina's. Permanently tensioned projection screen
Pagina afdrukken
Lace & Grommet
Section 3 - Wall Brackets
Brackets must be secured and properly anchored into the wall with appropriate support.
Do not apply a bracket just into drywall. Support needs to secure to stud work or
through ½" thick or larger supported plywood.
Please Note: If using the Extension Bracket, mount the Wall Mounting Plate first;
set the bracket and tighten in place.
After mounting the wall bracket, you can set the Lace and Grommet frame tube into place.
CAUTION! Make sure to tighten the setscrews to hold the frame securely in place in the bracket. Failure to lock the frame into place on the bracket could result in
the frame coming out of the bracket, creating the possibility of damage to the frame and injuries to bystanders.
Section 4 - Frame Assembly
Each tube will be labeled with numbers, always starting with the Upper Stage
Right Corner piece, and moving clockwise around the perimeter of the frame.
In other words Upper Stage Right Corner (top point) will have a "1" and the
next tube section moving horizontally across the top will also have an "1".
Move clockwise joining "1" to "1", "2" to "2", "3" to "3", etc
Join tubing together by sliding inserts into open tube. Lock together hand
tightening the provided attachment bolts into the black tubing at each joint
.
(see Figs. 3 and 4)
Please Note:
After hand tightening attach-
ment bolts, a ½" ratchet or
wrench should
be used to tighten each bolt.
Attachment Bolt
Be sure to review each tube piece to assure bungee and hooks are secured in
the tubing before attaching the surface to the hooks
Permanently Tensioned Projection Screen
Figure 2
(see Fig. 2).
Figure 3
Figure 4
(see below)
.
Hole for setting extension
from wall. Use
3
/
" lag bolt.
8
Setscrews for locking
frame into bracket
Fixed Wall Bracket
Attached to Wall Stud
with Frame Hanging
F R A M E
T O P O F
BOTTOM
BRACKETS
ROTATED
180°
M E
O F F R A
B O T T O M
Fixed Wall Bracket
Attached to Wall Stud
Securing Bottom of Frame
page 2 of 4
Figure 1