Draper Premier Installatie- en bedieningsinstructies - Pagina 5

Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Draper Premier. Draper Premier 7 pagina's. 220v premier electric projection screen
Ook voor Draper Premier: Installatie- en bedieningsinstructies (2 pagina's), Installatie- en bedieningsinstructies (2 pagina's), Installatie-instructies (2 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's), Installatie-instructies (2 pagina's), Installatie- en bedieningsinstructies (4 pagina's), Handleiding voor installatie en gebruik (7 pagina's)

Pagina afdrukken
Draper Premier Installatie- en bedieningsinstructies
Premier

Section 7 - Accessing Internal Low-Voltage Control Unit

PLEASE NOTE: Applies ONLY if Unit is built into case.
1.. Locate LVC-IV Unit.
2. Remove the two
star head screws from the motor end of the screen housing.
(2)
3. Remove the access panel with the LVC-IV from the screen housing.
PLEASE NOTE: Internal LVC-IV will increase overall case length by 1 13/16"

Section 8 - Dimensions

5¼"
(133mm)
2 ⁄ "
5¼"
(59mm)
(133mm)
2 ⁄ "
(59mm)
5 ⁄ "
(149mm)
5 ⁄ "
(149mm)
⁄ "
electrical connection
⁄ "
(22mm)
electrical connection
hole
(46mm)
Remove two (2)
screws from
endcap.
dia.
(22mm)
hole
dia.
2 ⁄ "
(54mm)
2 ⁄ "
(54mm)

(LVC-IV)

.
Figure 12
Fabric width + 7"
Fabric width + 7"
Viewing Surface
Viewing Surface
Remove
access panel
with LVC-IV.
*A second electrical connection hole
is included in the screen housing
in order to separate Low-Voltage
and High-Voltage Wiring.
(178mm)
(178mm)
page 5 of 7
Electrical
Connection
Hole*