Draper Premier Installatie-instructies - Pagina 3

Blader online of download pdf Installatie-instructies voor {categorie_naam} Draper Premier. Draper Premier 4 pagina's. 220v premier electric projection screen
Ook voor Draper Premier: Installatie- en bedieningsinstructies (2 pagina's), Installatie- en bedieningsinstructies (2 pagina's), Installatie-instructies (2 pagina's), Installatie- en bedieningsinstructies (7 pagina's), Installatie-instructies (2 pagina's), Installatie-instructies (2 pagina's), Installatie- en bedieningsinstructies (4 pagina's), Handleiding voor installatie en gebruik (7 pagina's)

Pagina afdrukken

Premier by Draper

Draper's Tab-Tensioning System is factory-set, and under normal circumstances will not require field adjustment.

If, however, you notice wrinkles, waves or other indications that the tensioning cables need to be adjusted, follow the procedure below.

1 Determine which side requires adjustment.

2 Secure dowel with one hand.

3 using phillips-head screwdriver, depress spring-loaded adjustment screw and slowly turn CLOCKWISE TO INCREASE tension,

or COUNTER-CLOCKWISE TO RELEASE tension. The screw adjusts in 60° turn increments. Adjust only one increment (60° turn) at a time

4 If problem is not corrected, leave screen in position for 24 hours to allow surface material to stretch into position.

5 If problem still is not corrected, repeat steps 2 and 3.

Caution: Do not touch

or bend surface.

Optional Ceiling Opening Trim Kit

(Dims-Side View)

Tab-Tension adjustment Procedure

DOWEL

Types of Installation

www.draperinc.com

TENSIONING

CABLE

ADJUSTMENT

SCREW

Wall

Appropriate hardware

provided by installer.

Case Dimensions*

" dia.

electrical

connection

hole

(765) 987-7999

TENSIONING

CABLE

ADJUSTMENT

SCREW

DOWEL

Suspended

Appropriate hardware

provided by installer.

Mounting

hole

PLEASE NOTE:

Built-In LVC-IV will increase

overall case length by 2".

Page 3 of 4

If using "S"

Hooks )by

others), be

sure to crimp

both ends

of the "S"

Hooks.