Draper Storm Force MT400 SF Instructies voor - Pagina 12
Blader online of download pdf Instructies voor voor {categorie_naam} Draper Storm Force MT400 SF. Draper Storm Force MT400 SF 16 pagina's. 400w 230v oscillating multi-tool kit
Ook voor Draper Storm Force MT400 SF: Gebruiksaanwijzing (20 pagina's)
Pagina afdrukken
10. MAINTENANCE
10.1 MAINTENANCE
Regular inspection and cleaning reduces the necessity for maintenance operations and will
keep your tool in good working condition. The motor must be correctly ventilated during
tool operation. For this reason avoid blocking the air inlets. If replacement of the supply cord
is necessary this has to be done by the manufacturer or his agent in order to avoid a safety
hazard. Remove the plug from the socket before carrying out adjustment, servicing or
maintenance.
11. TROUBLESHOOTING
11.1 TROUBLESHOOTING
Problem
Motor does not start
Machine vibrates
12. DISPOSAL
12.1 DISPOSAL
- At the end of the machine's working life, or when it can no longer be repaired, ensure
that it is disposed of according to national regulations.
- Contact your local authority for details of collection schemes in your area.
In all circumstances:
• Do not dispose of power tools with domestic waste.
• Do not incinerate.
• Do not abandon in the environment.
• Do not dispose of WEEE*
as unsorted municipal waste.
* Waste Electrical & Electronic Equipment.
12
Cause
1. Fuse.
2. Brushes worn.
3. Other.
1. Pad/bonnet damaged
or out of balance.
Remedy
1. 13amp time delay fuse
or circuit breaker.
2. Replace brushes.
3. Authorised service agent.
1. Replace pad/bonnet.