Draper 20849 Gebruiksaanwijzing - Pagina 11
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper 20849. Draper 20849 20 pagina's. Twin pack 10.8v li-ion cordless rotary drill & impact driver
Pagina afdrukken
8.
BASIC CORDLESS ROTARY DRILL OPERATIONS
8.1 BATTERY CHARGING - FIGS. 1 - 2
Check the mains voltage. Make sure the voltage of the
power source is the same as the voltage specified on the
rating plate of the charger unit.
Plug your mains plug into the power source. The green
LED indicator
Insert battery pack into battery compartment of the
charger. The red LED indicator
indicates that the battery pack is being fast charged
automatically.
When the battery pack is fully charged, the red LED
indicator will turn off and the green LED will illuminate
solid.
Remove the battery pack from the charger and unplug.
IMPORTANT CHARGING NOTES:
Longest life and best performance can be obtained if
the battery pack is charged when the surrounding air
temperature is between 18°C (65°F) and 24°C (75°F).
DO NOT charge battery pack in an air temperature
below 4.5°C (40°F), or above 40.5°C (105°F). This is
important and will prevent serious damage to the
battery pack.
The charger is designed to fast charge the battery pack
between 0°C (32°F) AND 45°C (113°F). If the battery pack, when inserted, is too cold or too
hot, the charger will not charge. The green LED and the red LED will blink alternatively and
continuously to indicate this situation. Once the air temperature is within tolerance, the fast
charging will begin.
CHARGER LIGHT INDICATOR
LED INDICATOR
GREEN
Blinking light
No Light
Solid Light
Blinking Light
No light
will blink indicating stand-by mode.
will light solid. This
RED
No Light
Solid light
No light
Blinking Light
Blinking Light
SITUATION
Stand by.
Charging.
Charging is complete.
Battery pack is too hot or cold (charging will begin
automatically when battery reaches correct
charging temperature).
Damaged or faulty battery pack.
FIG.1
FIG.2
11