Draper 71278 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper 71278. Draper 71278 12 pagina's. Metal cutting saw 185 mm

Pagina afdrukken

NOTE:

Remove the plug from the socket before

carrying out adjustment, servicing or

maintenance.

STARTING AND STOPPING THE SAW

(Fig.6.):

The on/off switch (H) is fitted with a safety

button (I) so that it is not possible to start the

saw by accident. To start the saw press the

safety button (I) then depress button (H) and

hold. The saw will stop when switch (H) is

released.

CUTTING DEPTH ADJUSTMENT (Fig.7.):

For a clean cut, it is recommended to adjust

the cutting depth according to the material

thickness.

In order to adjust the cutting depth, loosen

the locking lever (J), move the saw upwards

or downwards accordingly and resecure with

locking lever (J).

HANDLE HEIGHT ADJUSTMENT (Fig.8.):

To create a more comfortable working

position, it is possible to angle the handle.

Slide up locking catch (K), fold down release

catch (L). Set the handle into one of the six

positions, as applicable. Locking place by

folding catch (L) back up into place. Slide

the locking catch (K) up to ensure the catch

is fully folded up.

PARALLEL CUTTING GUIDE (Fig.9.):

For parallel cuts, use cutting guide (M).

Cutting width is adjusted by loosening knobs

(N), slide the guide to the required position

and tighten knobs (N).

OPERATION AND USE

Fig.6.

Fig.7.

Fig.8.

Fig.9.

- 8 -

(H)

(L)

(K)

(M)

(I)

(J)

(N)