Draper CSM355 Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper CSM355. Draper CSM355 16 pagina's. 355mm dry metal cutting saw

MAINTENANCE

Brush inspection and replacement.

CAUTION: Before inspecting the brushes,

disconnect the machine from the power supply.

BRUSH WEAR AND REPLACING BRUSHES

On new machines check for brush wear after the

first 50 hours of use, then every 10 hours.

Replace brushes when they have worn down to

5mm. Unscrew brush covers. Fig.15. Remove

brushes. Fig.16. Check for wear or replace.

NOTE: When replacing brushes always replace

both brushes. For safety, when the machine is not

in use attach chain. Fig.17.

AFTER EACH USE:

Disconnect the plug from the power supply. Remove the blade and flanges. Wipe deposits of

swarf from the housing and guard. Check operation and condition of the lower guard, it should

be securely attached and working properly. The cable and tool should be wiped occasionally

with a clean cloth and mild soap only to prevent deterioration from oil and grease.

CAUTION:

Certain cleaning agents and solvents can damage plastic parts. Some of these are: gasolene,

carbon tetrachloride, chlorinated cleaning solvents, ammonia and household detergents that

contain ammonia. Avoiding use of these and other types of cleaning agents minimizes the

possibility of damage.

WARNING:

The use of any other accessory not specified in this manual may create a hazard.

WARNING:

Electrical or mechanical repairs should only be carried out by trained service personnel.

Fig.15.

Fig.16.

Fig.17.

- 10 -