Draper D20 98104 Snelstarthandleiding - Pagina 10

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Draper D20 98104. Draper D20 98104 14 pagina's. 20v brushless 125mm/115mm angle grinder

Pagina afdrukken

Important information:

B, C, D :

For cutting applications, and to comply to current

legislation, it is necessary to replace the "grinding"

guard supplied with this machine with a "cutting"

guard (Please consult the Draper website or your

local stockist for details). High oscillation

frequency:

Grinder Spindle (M14)

A. Type 27:

Depressed Centre Grinding Wheel

B. Type 41:

Flat Cutting-off Wheel

C. Type 42:

Depressed Centre Cutting-off Wheel

D. Superabrasive Wheel

(Diamond/CBN Abrasive)

– 10 –

E. Wire Cup Brush

FIG.

6.5 FITTING GRINDING DISCS - FIGS.

6–7

Press and hold the spindle lock button (2). Loosen

the locking flange (3) anti-clockwise using the pin

spanner (9) supplied. The spindle may rotate slightly

before the spindle lock fully engages.

(9)

(2)

FIG.

(3)

FIG.

Remove the locking flange only. Clean the flanges and

spindle prior to fitting any accessory. If the rear flange

is removed for cleaning, ensure it locates correctly on

the spindle flats when refitting and does not spin freely.

When fitting the appropriate accessory please refer to

(Fig.5) for specific details on the locking flange correct

orientation as applicable.

(3)