Draper FlexShade NEXD Installatie- en bedieningsinstructies - Pagina 6

Blader online of download pdf Installatie- en bedieningsinstructies voor {categorie_naam} Draper FlexShade NEXD. Draper FlexShade NEXD 8 pagina's. Clutch-operated small and large hardware
Ook voor Draper FlexShade NEXD: Installatie- en bedieningsinstructies (6 pagina's), Installatie- en bedieningsinstructies (8 pagina's), Gebruiksaanwijzing (8 pagina's), Installatie- en bedieningsinstructies (10 pagina's), Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken
Draper FlexShade NEXD Installatie- en bedieningsinstructies
Clutch-Operated FlexShade
Small and Large Hardware

Section 6 - Top/Back Cover Installation

Figure 10-A
2.
Using pre-drilled holes
in endcaps, mark
headbox for drilling.
Figure 10-C
I D L
E N D
& C
O V E
NEXD,
®
1.
Place endcaps into top/
back cover pieces of
ceiling/wall headbox.
Please Note: Installer
must provide
adequate clearance
for removal of Roller
Assembly during
installation and
maintenance.
E R
C A P
R
Figure 10-B
Please Note: Headbox MUST BE
mounted directly to ceiling or wall, or
to a continuous blocking that has been
secured to building structure.
O P E
R A T
E N D
O R
C A P
& C
O V E
R
4.
Attach endcaps and top/
back cover pieces to wall
or ceiling, using mounting
hardware appropriate for
site conditions.
Next, mount roller
assemblies
Please Note: A minimum of two
(2)
endcap.
page 6 of 8
3.
Drill holes in back
or top
(wall mount)
of
(ceiling mount)
top/back cover
pieces.
.
(Sections 3 & 4)
screws is required for each