Draper FlexShade NEXD Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Draper FlexShade NEXD. Draper FlexShade NEXD 12 pagina's. Clutch-operated small and large hardware
Ook voor Draper FlexShade NEXD: Installatie- en bedieningsinstructies (6 pagina's), Installatie- en bedieningsinstructies (8 pagina's), Gebruiksaanwijzing (8 pagina's), Installatie- en bedieningsinstructies (8 pagina's), Installatie- en bedieningsinstructies (10 pagina's)

Pagina afdrukken
Draper FlexShade NEXD Gebruiksaanwijzing
Dual Roller FlexShade

Section 5 - Shade Fabric Roller Mounting

Caution: Do not allow shade roller to become exposed by lowering shade fabric too far.
Be sure to use stop balls provided by Draper
by others may be too small, and become lodged in clutch.
TOP ROLLER ASSEMBLY
Figure 6-A
!
Tube indentation
must be aligned
with the FLAT side
of the clutch sprocket.
BOTTOM ROLLER ASSEMBLY
Figure 6-C
!
Tube indentation
must be aligned
with the FLAT
side of the
clutch sprocket.
5.
Test shade to ensure that
roller is level and operating
properly.
If not, adjust idler leveling
screw with 3mm Hex Wrench,
available upon request when
ordering shade.
NEXD
®

(Extra Large Hardware shown)

to set up and down travel limits. Stop balls
®
1.
Carefully work
open
end
(clutch)
of TOP roller onto
bead chain clutch.
3.
Carefully work open
end of BOTTOM roller
onto bead chain clutch.
Please Note: If shade fabric is tracking to one side, see
Figure 6-B
Figure 6-D
(clutch)
Figure 6-E
"Field Adjustments," Page 2.
2.
Slide idler pin end of the top roller
up, through one of the slots on
idler endcap, and into seat for pin.
4.
Slide idler pin end of the bottom
roller up, through one of the slots
on idler endcap, and into
seat for pin.
page 7 of 12
NOTE: Illustration
shows different
path options.
NOTE: Illustration
shows different
path options.