BCS 740 Gebruiksaanwijzing - Pagina 13
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} BCS 740. BCS 740 20 pagina's. Two wheel tractors
Ook voor BCS 740: Gebruiksaanwijzing (20 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 2. Safety
- 3. Controls Description
- 4. Sound & Vibration Levels
- 5. Assembly Instructions
- 6. Attaching Implements
- 7. Operation
- 8. Maintenance Guide
- 9. Maintenance Programme
- 10. Service Information
- 11. Troubleshooting Guide
- 12. Risk Assessment
- 13. Service Record
- 14. Manufacturer's Information
Every Week
•
With the machine on a level surface, check the gearbox oil level, top up as necessary using
the correct oil as listed below. The gearbox oil level should reach between the two notches
on the dipstick (fig. 2, D) .
After the First 2 Weeks or 30 Hours of Work
Replace the gearbox oil filter ONLY, (fig. 1, A), part number 58056249.
•
•
Check the gearbox oil level using the dipstick (figs. 1 & 2, C) , run the machine for 2-3
minutes and recheck gearbox oil level, top up as necessary using the correct oil as listed
below.
Every 100 Hours of Work or 12 Months
Change the gearbox oil by removing the gearbox drain plug (fig. 3, B) .
•
•
Replace the gearbox oil filter (fig. 1, A), part number 58056249.
•
Clean the gearbox drain plug and refit.
•
Fill gearbox using the correct oil and quantity as listed below.
•
Check the gearbox oil level, run the machine for 2-3 minutes and recheck gearbox oil level.
C
TWT/PU/0617
Service Information
A
Fig. 1
BCS Two Wheel Tractor Power Unit
To replace the oil filter (fig. 1, A)
1. Using the correct spanner, remove the
filter.
2. Smear a film of oil on the rubber gasket
of the new filter.
3. Mount the new filter, screwing and
tightening by hand only.
Page 13