BD Diesel Performance 1037135 Installatiehandleiding - Pagina 12

Blader online of download pdf Installatiehandleiding voor {categorie_naam} BD Diesel Performance 1037135. BD Diesel Performance 1037135 18 pagina's.

8 February 2021

CRUISE CONTROL WIRING 2000-2002 6-speed MANUAL ONLY

This step is only for 2000-2002 manual transmission trucks with cruise control. All

other vehicles do not need the cruise control wires connected as they use a vacuum

servo for cruise control rather than an internal program in the ECM.

If your vehicle does not have cruise control you can remove the blue and green wires

from the DFIV and discard them. Skip this step and proceed to Switch Installation.

To obtain access to the Cruise

Control wiring harness remove the

lower steering column panel by

removing the mounting screws

and unsnapping the panel from the

instrument panel.

Under the dash running vertical by

the left of the steering column,

locate the smaller wiring harness

that runs out of the main harness.

Remove some of the black electrical tape to gain access to the smaller wire bundle.

THERE IS A BLACK WIRE WITH A TWISTED LIGHT BLUE/GREEN TRACER DO

NOT CONNECT OR TEST THIS WIRE AS IT IS CONNECTED TO THE AIR BAG

AND THE BAG MAY DEPLOY CAUSING DAMAGE AND/OR INJURY

Remove some of the black electrical tape from the small bundle to gain access to the

small Black wire with Light Blue tracer and install a Posi-Tap™ to it. Insert the Blue

wire from the DFIV module into this connector.

In this same wiring harness, locate the Red wire with Light Green tracer and install

another Posi-Tap™. Insert the Green wire from the DFIV module into this connector.

BD Universal Remote Mount Vacuum Brake

***DANGER***

BD Engine Brake Inc.

1-800-887-5030 | https://www.bddiesel.com