Bosch CMG7241 1M Series Gebruikershandleiding en installatie-instructies - Pagina 16

Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Bosch CMG7241 1M Series. Bosch CMG7241 1M Series 44 pagina's.
Ook voor Bosch CMG7241 1M Series: Gebruikershandleiding en installatie-instructies (44 pagina's)

Pagina afdrukken
Bosch CMG7241 1M Series Gebruikershandleiding en installatie-instructies
en Microwave
WARNING ‒ Risk of burns!
The accessible parts of the appliance become hot dur-
ing operation.
Never touch these hot parts.
▶
Keep children at a safe distance.
▶
Place the empty cookware in the cooking compart-
1.
ment.
Set the appliance to run for 30 seconds to 1 minute
2.
at maximum power.
Start the operation.
3.
4.
Check the cookware several times:
If the cookware remains cold or warm to the
‒
touch, it is suitable for microwave use.
If the cookware becomes hot or sparks are cre-
‒
ated, stop the cookware test. The cookware is
not microwave-safe.
10.2 Setting options with the microwave
The microwave can be used on its own, or in combina-
tion with a different operating mode.
Microwave-only operation
The electromagnetic waves of the microwave alone
generate energy and this is converted into heat in food,
for example.
Added microwave
Adding the microwave to an operating mode reduces
the cooking time.
You can combine the microwave with the following
functions:
¡ Types of heating → Page 13
– 2D hot air
– Top/bottom heating
– Circulated air grilling 
– Full-surface grill
– Centre-area grill
¡ → "Dishes", Page 17
Possible microwave outputs combined with an
operating mode include:
¡ 90 watts
¡ 180 watts
¡ 360 watts
10.3 Setting the microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 10
¡ → "Cookware and accessories with microwave",
Page 15
Press "Microwave" in the menu.
1.
Or select the microwave directly using the
‒
ton.
Press the
microwave output ("Boost").
2.
Use the setting ring to set the microwave output.
3.
To confirm the set microwave output, press
4.
the display.
Press
⁠ " Cooking time".
5.
A cooking time must always be set to operate the
microwave.
16
To change the preset cooking time, press the relev-
6.
ant time value, e.g. minute display "m" or second
display "s".
a The selected value is marked in blue.
Use the setting ring to set the cooking time.
7.
If required, use
To confirm the set cooking time, press
8.
play.
Press
9.
a The microwave starts and the cooking time counts
down. The display shows the performance reduction
for the maximum microwave output "Boost".
→ "Microwave output settings", Page 10
a When the time has elapsed, a signal sounds. A noti-
fication appears on the display confirming that the
operation has finished.
Once the cooking time has elapsed:
10.
If required, you can select other settings and re-
‒
start the operation.
When the food is ready, use
‒
pliance off.
If condensation has formed in the cooking compart-
11.
ment, dry the cooking compartment.
→ "Drying", Page 24
Note: If you open the appliance door during operation,
the operation stops. If you close the appliance door,
you must continue the operation. If you have changed
the basic setting for this, make sure that the microwave
does not resume operation without food inside.
→ "Basic settings", Page 19
Changing the microwave output
You can change the microwave output at any time.
Press
1.
Press the microwave output
2.
Use the setting ring to set the microwave output.
3.
To confirm the change, press
4.
a The change is applied.
Changing the cooking time
You can change the cooking time at any time.
Press
1.
Press the cooking time
2.
Use the setting ring to change the cooking time.
3.
To confirm the change, press
4.
a The change is applied.
10.4 Setting added microwave
Note:
Note the correct way to operate the microwave:
¡ → "Safety", Page 2
¡ → "Preventing material damage", Page 6
¡ → "Microwave output settings", Page 10
¡ → "Cookware and accessories with microwave",
Page 15
but-
Requirement: Observe the information about the re-
spective operating mode.
→ "Setting options with the microwave", Page 16
on
Press the operating mode that you require in the
1.
menu.
Select the settings for the operating mode, e.g. type
2.
of heating and temperature.
Press
3.
Use the setting ring to set the microwave output.
4.
to reset the setting value.
to start the operation.
on the display.
⁠ .
on the display.
⁠ .
⁠   "Added microwave".
on the dis-
to switch the ap-
on the display.
on the display.