Bosch CSG656B 7B Series Gebruikershandleiding en installatie-instructies - Pagina 22

Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Bosch CSG656B 7B Series. Bosch CSG656B 7B Series 48 pagina's. Combi steam oven

en Home Connect
Note: Your changes to the basic settings will be re-
tained even after a power failure.
Discarding changes to the basic settings
Press
​ ⁠ and use "Do not save" to confirm.
a All changes will be discarded and not saved.
16  Home Connect
This appliance is network-capable. Connecting your ap-
pliance to a mobile device lets you control its functions
via the Home Connect app, adjust its basic settings
and monitor its operating status.
The Home Connect services are not available in every
country. The availability of the Home Connect function
depends on the availability of Home Connect services
in your country. You can find information about this at:
www.home-connect.com.
The Home Connect app guides you through the entire
login process. Follow the instructions in the Home Con-
nect app to configure the settings.
Tips
¡ Please consult the documents supplied by
Home Connect.
¡ Please also follow the instructions in the Home Con-
nect app.
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
16.2 Home Connect Settings
You can adjust the settings and network settings for Home Connect by going to your appliance's basic settings.
Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance
is connected to your home network.
Basic setting
Wi-Fi
Network
Connect to app
22
Possible settings
Switch on
Switch off
Connect to network
Disconnect from network
-
15.3 Setting the time
Requirement: The appliance is switched on.
Press
1.
Press "Basic settings".
2.
Press "Time".
3.
Use the control ring to change the time.
4.
To save your changes, press
5.
to confirm.
16.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
Download the Home Connect app.
1.
Open the Home Connect app and scan the follow-
2.
ing QR code.
Follow the instructions in the Home Connect app.
3.
Explanation
If Wi-Fi is activated, you can use Home Connect.
In networked standby mode, the appliance requires a max-
imum of 2 W.
If you disconnect the appliance from the network, all network
information will be deleted. This setting is useful if you have
new login details for the router.
This setting initiates the connection between the Home Con-
nect app and the appliance.
​ ⁠ .
​ ⁠ and use "Save"