Bosch FAP-OC 500Series Productinformatie - Pagina 32

Blader online of download pdf Productinformatie voor {categorie_naam} Bosch FAP-OC 500Series. Bosch FAP-OC 500Series 40 pagina's. Built-in wall ovens
Ook voor Bosch FAP-OC 500Series: Handleiding voor installatie-instructies (21 pagina's), Gebruiksaanwijzing (40 pagina's), Installatiehandleiding (6 pagina's), Installatiehandleiding (28 pagina's), Gebruikershandleiding (48 pagina's), Gebruikershandleiding (48 pagina's), Installatiehandleiding (28 pagina's), Gebruiks- en onderhoudshandleiding (44 pagina's), Installatiehandleiding (32 pagina's), Gebruiks- en onderhoudshandleiding / Installatie-instructies (40 pagina's), Snelle referentiehandleiding (4 pagina's), Gebruiks- en onderhoudshandleiding (27 pagina's), Installatiehandleiding (24 pagina's), Installatiehandleiding (32 pagina's), Gebruiks- en onderhoudshandleiding (24 pagina's), Installatiehandleiding (28 pagina's), Servicehandleiding (41 pagina's), Gebruiks- en onderhoudshandleiding (21 pagina's), Installatiehandleiding (32 pagina's), Servicehandleiding (36 pagina's), Installatiehandleiding (32 pagina's), Snelstart- en veiligheidshandleiding (13 pagina's)

Pagina afdrukken
Bosch FAP-OC 500Series Productinformatie
Product Information 500 Series LSN Fire Detectors (EU)

7. Maintenance and Service

For maintenance and inspection work on security systems, the regulations laid down
in DIN VDE 0833 strictly apply in Germany; these refer to the maintenance intervals
specified by the manufacturer.
The 500 series detectors do not require to be removed from their bases
for routine maintenance.
If occasionally a detector requires replacement due to a design change
or damage to the device then this should be carried out by a qualified en-
gineer.
This should only be undertaken when the system is offline and the user
has made alternative arrangements for emergency evacuation.
D Maintenance and inspection work should be carried out regularly and by trained
technical personnel.
D Bosch Sicherheitssysteme GmbH recommends a functional and visual inspection
at least once a year.
Check of the LED display
Visual check of the mounting
Visual inspection for damage and contamination of the
detector surface
Check monitoring area for limitations of function and
interference caused by lamps
Test of the optical sensors (see Chap. 7.4.)
Combined test with detector test device and CO testing
gas (see Chap. 7.3.)
Multisensor detectors with C−sensors must be exchanged every 5 years.
D
. FAP−OC 500:
Due to the life expectancy of the gas sensor, the FAP−OC 500 detector switches
off the C sensor after 5 years of operation. The detector will continue to function as
an O detector.
At the fire panel, an according fault indication is displayed.
The detector should then be exchanged immediately in order to be able to keep
using the higher reliability of detection of the OC detector.
D The cleaning intervals depend on the environmental conditions.
. The detector can be wiped over with a soft cloth and a proprietary plastic cleaning
agent. Cleaning should only take place in test mode.
Test steps
Test steps
Page 32
PI − 34.70 en
Detector type
O
OC
x
x
x
x
x
x
x
x
x
−
−
x
BDL−F.01U.025.876
A5.en/ 02.02.2006
ST−FIR/PRM1 / zab