Bosch HB 39 B Series Gebruikershandleiding en installatie-instructies - Pagina 19
Blader online of download pdf Gebruikershandleiding en installatie-instructies voor {categorie_naam} Bosch HB 39 B Series. Bosch HB 39 B Series 40 pagina's.
Ook voor Bosch HB 39 B Series: Gebruikershandleiding en installatie-instructies (36 pagina's)
Pagina afdrukken
Notes
¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed
when operating the appliance via the Home Con-
nect app.
→ "Safety", Page 2
¡ Operating the appliance on the appliance itself al-
ways takes priority. During this time it is not possible
to operate the appliance using the Home Connect
app.
¡ In networked standby mode, the appliance requires
a maximum of 2 W.
15.1 Setting up Home Connect
Requirements
¡ The appliance is connected to the power supply and
is switched on.
¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smart-
phone.
¡ The mobile device and the appliance are within
range of your home network's Wi-Fi signal.
15.2 Home Connect Settings
You can adjust the settings and network settings for Home Connect in the basic settings for your appliance.
The settings shown in the display depend on whether Home Connect is set up and whether the appliance is connec-
ted to the Wi-Fi.
Basic setting
Setting with the as-
sistant
Appliance info
Wi-Fi
Disconnecting the
network
Connect to app
Connect to other app
Software update
15.3 Operating the appliance with the
Home Connect app
When the Remote start function is activated, you can
use the Home Connect app to remotely configure the
appliance's settings and start it.
Note: Some operating modes can only be started on
the oven.
Requirements
¡ The appliance is switched on.
¡ The appliance is connected to the Wi-Fi and to the
Home Connect app.
1.
To activate the remote start, press and hold
a If the remote start is activated, the display shows .
Implement a setting in the Home Connect app and
2.
send it to the appliance.
Possible settings
-
-
On
Off
-
-
-
Download the Home Connect app.
1.
Open the Home Connect app and scan the follow-
2.
ing QR code.
Follow the instructions in the Home Connect app.
3.
Explanation
An assistant guides you through the set-up and settings of
Home Connect.
If you select the appliance information, the display shows in-
formation about the network or the appliance.
If Wi-Fi is activated, you can use Home Connect.
In networked standby mode, the appliance requires max. 2 W.
If you disconnect from the network, the network information is
retained.
After switching on the appliance, it may take a few seconds
until the appliance has established the connection to the net-
work.
The setting starts the connection between the Home Connect
app and the appliance.
The setting is only displayed if an update is available.
The appliance deactivates the remote start in the
following cases:
– If you open the oven door within 15 minutes after
activation.
– If you open the oven door within 15 minutes after
the operation ends.
– 24 hours after activating the remote start.
Note: The remote start is automatically activated
when you start the oven mode on the appliance.
You can change the settings via the Home Connect
app or start a new programme.
.
Home Connect en
19