Electrolux 506062 Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} Electrolux 506062. Electrolux 506062 28 pagina's.

Characteristics of power supply

The AC power supply to the appliance must meet the following conditions:

•

max. voltage variation ± 10%

•

max. frequency variation ± 1% continuous ± 2% for a short period.

Harmonic distorsion, unbalanced three-phase supply voltage, voltage pulses, interruption, dips and the other electric

characteristics must respect the provisions of point 4.3.2 of Standard EN 60204-1 (IEC 60204-1).

IMPORTANT!

The appliance's power supply must be protected against overcurrents (short circuits and over-

loads) by fuses or suitable thermal magnetic circuit breakers.

These must be fitted on an omnipolar disconnection system having a contact gap of at least 3 mm.

IMPORTANT!

For protection against indirect contacts (depending on the type of supply provided for and con-

nection of earths to the equipotential protection circuit) refer to point 6.3.3 of EN 60204-1 (IEC

60204-1) with the use of protection devices that ensure automatic cut-off of the supply in case of

isolation fault in the TN or TT systems or, for IT systems, the use of isolation controllers or differ-

ential current protection devices to activate automatic power disconnection (an isolation control-

ler must be provided for indicating a possible first earth fault of a live part, unless a protection

device is supplied for switching off the power in case of a such a fault. This device must activate

an acoustic and/or visual signal which must continue for the entire duration of the fault).

For example: in a TT system, a differential switch with cut-in current (e.g. 30 mA) coordinated

with the earthing system of the building where the appliance is located must be installed ahead of

the supply.

IMPORTANT!

Customers are requested to follow these instructions, otherwise the Manufacturer does not guar-

antee the appliance for continuous operation and/or against faults.