Electrolux 506063 Handmatig - Pagina 22
Blader online of download pdf Handmatig voor {categorie_naam} Electrolux 506063. Electrolux 506063 28 pagina's.
![Electrolux 506063 Handmatig](/uploads/products/server2/1380309/1380309.png)
I
I1
Introduction
The appliances are provided with electric and/or
mechanical safety devices for protecting workers and
the appliance itself. Therefore the user must not
remove or tamper with such devices.
The Manufacturer declines any liability for damage due
to tampering or their non-use.
I1.1
Protection devices installed on the
appliance
I1.1.1
Guards
The guards on the appliance are:
-
fixed guards (e.g. casings, covers, side panelling,
etc.), fixed to the appliance and/or frame with
screws or quick-release couplings that can only be
removed or opened with tools;
-
interlocked movable guards (front panels) for
access to inside the appliance;
-
access doors to the appliance's electrical equip-
ment, made from hinged panels openable with
tools. The door must not be opened during appli-
ance movement, if inside the door there is equip-
ment that is hazardous when live or under
pressure.
IMPORTANT!
Several illustrations in the manual rep-
resent the appliance, or parts of it,
without
guards
removed. This is purely for explanatory
requirements. Never operate the appli-
ance without the guards or with the
safety devices deactivated.
24
GENERAL SAFETY RULES
or
with
guards
I1.2
Safety signs to be displayed on the
appliance or near the work area
MEANING
P
Do not oil, lubricate, repair and
R
adjust moving parts.
O
H
Do not remove the safety devices.
I
B
I
Do not use water to extinguish fires
T
(shown on electrical parts).
I
O
N
DANGER OF CRUSHING HANDS
D
A
DANGER OF BURNS
N
G
E
DANGER OF ELECTROCUTION
R
(shown on electrical parts with indi-
cation of voltage).
WARNING!
Do not remove, tamper with or make
the labels on the appliance illegible.
I2
Decommissioning
When the appliance is no longer to be used, make it
unusable by removing the feed wiring from the power
supply and the water connections.
I3
Instructions for use and maintenance
Risks mainly of a mechanical, thermal and electrical
nature are present in the appliance.
Where possible the risks have been neutralized:
•
directly, by means of adequate design solutions,
•
or indirectly by using guards, protection and safety
devices.
Any anomalous situations are signalled on the control
panel display.
During maintenance several risks remain, as these
could not be eliminated and which must be neutralized
through specific behaviour and precautions.
Do not carry out any control, cleaning, repair or main-
tenance operations on moving parts.
Workers must be informed of the prohibition by means
of clearly visible signs.
To guarantee appliance efficiency and correct opera-
tion, periodical maintenance must be carried out
according to the instructions given in this manual.