Bosch HBC26D553A Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bosch HBC26D553A. Bosch HBC26D553A 28 pagina's.
Pagina afdrukken
Press the
n
button.
3.
The appliance heats up to 100 °C. The cooking time
(20 minutes) does not start to count down until the set
temperature has been reached. Do not open the appliance
door during this time.
The cooking operation automatically ends and a signal
sounds.
Press the
button to switch off the appliance.
%
4.
Leave the appliance door ajar until the appliance has cooled
down.
Operating the appliance
In this section, you can read about
how to fill the water tank
■
how to switch the appliance on and off
■
what to note after each use
■
how you can use the recommended settings
■
Filling the water tank
When you open the appliance door, you will see the water tank
on the right-hand side.
Caution!
Use of unsuitable liquids may damage the appliance
Only use fresh tap water, softened water or uncarbonated
■
mineral water.
If your tap water is very hard, we recommend that you use
■
softened water.
Do not use distilled water, highly chlorinated tap water
■
(> 40 mg/l) or other liquids.
You can obtain information about your tap water from your
water supplier. The water hardness can be checked with the
test strips enclosed.
Fill the water tank before each use:
Open the appliance door and take out the water tank.
1.
Fill the water tank with cold water up to the "max" mark.
2.
Close the tank cover until you feel it engage.
3.
Slide in the water tank until it engages.
4.
Cleaning the accessories before use
Using soapy water and a soft cloth, clean the accessories
thoroughly before first use.
Switching on the appliance
1.
2.
3.
4.
Type of heating
Steam
Reheat
Prove
Defrosting
5.
6.
7.
P D [
8.
9.
"Fill water tank?" message
This message appears if you set a type of heating and the
water tank is only half full.
If you think that the water in the water tank is sufficient for the
cooking procedure, you can start the appliance. If not, fill the
water tank to the "max" mark, slide it back in and start the
appliance.
Current temperature
Press the
The current temperature is displayed for 3 seconds.
Press the
button to switch on the appliance.
%
The button description appears in the display for
approximately 4 seconds. The display then switches
automatically to the "Types of heating" menu.
Or press the
button to go directly to the "Types of heating"
è
menu.
Turn the rotary selector to set the desired type of heating.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
6WHDP
&
&
Press the
button.
X
The recommended temperature is highlighted.
Turn the rotary selector to set the desired temperature.
Press the
button.
0
Switch to cooking time using the rotary selector.
Press the
button.
X
The default cooking time is highlighted.
Turn the rotary selector to set the required cooking time.
Press the
button to start the cooking operation.
n
The appliance heats up.
For the Steam type of heating, the cooking time starts
counting down after the heating-up time.
°
button.
Temperature range
35 - 100 °C
80 - 100 °C
35 - 50 °C
35 - 60 °C
7