Bdcom switch module Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Bdcom switch module. Bdcom switch module 15 pagina's.

Chapter 2 Installing Module in BDCOM Switches

The section explains how to install interface module. Before installing interface module,

make sure the switch is turned off.

Note:

Interface module does not support hot plug. Hot plug may cause permanent damage to interface

module.

Operations:

(1)

Turn off the power. To prevent damage caused by static, keep the switch and

personnel grounded.

(2)

Unplug all the cables.

(3)

Use a flat head screwdriver to remove the piece of iron on the interface

module (see the following picture). Do throw away the piece of iron.

(4)

Put the interface module in the guiding track. Slide it into the switch. (Refer to

the illustration below.)

(5)

Slide the interface module and align it to the switch.

(6)

Use the flat head screwdriver fasten the interface module and the switch.

(7)

The following chapters explain different interface module cable connections and

LED status. Refer to the corresponding chapters for external connection.

(8)

After installation, start installing software.

BDCOM switch module Hardware Installation Guide

- 3 -