Draytek VigorSwitch G2540xs Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Draytek VigorSwitch G2540xs. Draytek VigorSwitch G2540xs 8 pagina's. L2+ managed switch
Pagina afdrukken
2
.
P
a
n
e
l
E
2
.
P
a
n
e
l
E
Status
LED
On (Red)
Monitor
Off
On (Green)
Blinking (Green)
SYS
Off
On (Green)
PWR
Off
On (Green)
Port 1 ~ 48
On (Amber)
Blinking
(GbE RJ45)
Off
On (Green)
Port 49 ~ 54
On (Blue)
(SFP+)
Blinking
Interface
RST
Port 1 ~ 48
Port 49 ~ 54 (SFP+)
Console
x
p
l
a
n
a
t
i
o
n
x
p
l
a
n
a
t
i
o
n
Port 1 ~ 48 (GbE RJ45)
Explanation
An alert for system failure due to overheating or wrong
voltage.
The device is in normal condition and running normally.
The switch finishes system booting and the system is ready.
The switch is powered on and starts system booting.
The power is off or the system is not ready /
malfunctioning.
The device is powered on and running normally.
The device is not ready or is failed.
The device is connected with 1000Mbps.
The device is connected with 10/100Mbps.
The system is sending or receiving data through the port.
The port is disconnected or the link is failed.
The device is connected with 1000Mbps.
The device is connected with 10Gbps.
The system is sending or receiving data through the port.
Description
Restore the default settings.
Port 1 to Port 48 can be used for Ethernet connection.
Port 49 to Port 54 are used for 10G/1000M fiber
connection.
Used to perform telnet command control.
Power inlet for AC input (100~240V/AC, 50/60Hz).
3
Port 49 ~ 54 (SFP+)