Draytek VigorSwitch P1282 Snelstarthandleiding - Pagina 13
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Draytek VigorSwitch P1282. Draytek VigorSwitch P1282 14 pagina's. Web smart gigabit switch
Ook voor Draytek VigorSwitch P1282: Snelstarthandleiding (10 pagina's), Snelstarthandleiding (9 pagina's)
Pagina afdrukken
software configuration
In this section, we take VigorSwitch P1282 as an example:
Before using the switch, perform the following steps:
1. Set up a physical path between the configured switch and a PC using
qualified Cat UTP. 5e cable with RJ-45 connector.
If a PC connects directly to the switch, you must set the same subnet mask for the PC and the
switch. The managed switch defaults are listed below:
IP adress
Subnet mask
DHCP client
Username
Password
2. After setting the correct IP address on your PC, open your web browser and access
the IP address of the switch.
192.168.1.224
255.255.255.0
Enabled (activated)
administration
administration
6