Electrolux EW 1035 F Instructieboekje - Pagina 17
Blader online of download pdf Instructieboekje voor {categorie_naam} Electrolux EW 1035 F. Electrolux EW 1035 F 25 pagina's.
Ook voor Electrolux EW 1035 F: Instructieboekje (22 pagina's), Instructieboekje (27 pagina's)
Pagina afdrukken
7. Select the required options
The light corresponding to the depressed button
illuminates.
8. Start the programme
To start the selected programme, press the
"Inicio/Pausa" button; the corresponding light stops
flashing, and only the light relevant to the phase that
is in progress will remain lit.
9. Changing the options when the
programme has started
If you wish to change some options after the
programme has started, first set the machine to
PAUSE by pressing the "Inicio/Pausa" button. Now, it
is possible the options, the spin speed and the
washing temperature, if they have not been executed
by the appliance.
10. Interrupting a programme
Depress the "Inicio/Pausa" button to interrupt a
programme which is running, the corresponding light
starts to flash. Depress the same button again to
restart the programme.
11. Cancelling a programme
Turn the selector dial to PARO to cancel a
programme which is running. Now you can select a
new programme. The new programme will start from
the begging, keeping the water in the drum.
12. Opening the door after the
programme has started
First set the machine to PAUSE by pressing the
"Inicio/Pausa" button.
If the door does not open, this means that the
machine is already heating, that the water level is
above the bottom edge of the door or that the drum
is turning.
If you cannot open the door but you need to open
you have to switch the machine off turning the
selector dial to PARO. After about 3 minutes the
door can be opened (pay attention to the water level
and temperature). To restart the programme turn the
dial to the previous programme repeating the options
previously selected and press "Inicio/Pausa" button.
13. At the end of the programme
The machine stops automatically.
If the anti-crease option has been selected, the light
of the "Inicio/Pausa" button goes off, the door
remains locked, the pilot lights "Fin" and
"Antiarrugas" remain lit to indicate that the water
must be empitied out before openinig the door.
Turn the programme selector dial to Reset PARO to
switch the machine off.
To empty out water there are 2 possibilities:
- Select drain (Descarga) programme :
the water is emptied out without spinning.
- Select the spin (Centrifugado) or the delicate
spin (Centrifugado Delicado). Select the spin
speed by means of the relevant button and then
depress the "Incio/Pausa" button. The water is
emptied out and the laundry is spun at the
selected spin speed.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
40