Draytek VigorSwitch V1281 Snelstarthandleiding - Pagina 10

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Draytek VigorSwitch V1281. Draytek VigorSwitch V1281 20 pagina's.

Topology and Hardware Installation

Installing and configuring your VigorSwitch V1281 should be very straightforward

if you plan carefully and are clear about your network/AV topology.

Before starting, ensure that you know how many

sources

(Satellite Receivers,

Blu-Ray, DVD, STB etc.) you will have and how many

outputs

(screens/projectors)

you'll be feeding to. You will need an HDMI-to-IP sender for each source and a

receiver for each output (see previous section).

In the example below, a pub has with three source devices on the left and four

output screens on the right:

For this example, you would need three HDMI-over-IP senders and four receivers.

Any port on the V1281 can be defined as one of three modes (source, output or

LAN) so it doesn't matter which port you select for your sources or outputs. Later,

when you configure the V1281, you will allocate each port's function.