Drayton Lifestyle LP711Si Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Drayton Lifestyle LP711Si. Drayton Lifestyle LP711Si 20 pagina's. Central heating control
Ook voor Drayton Lifestyle LP711Si: Installatie-instructies (2 pagina's), Service-instructies (2 pagina's)

Drayton Lifestyle LP711Si Gebruiksaanwijzing
OFF2, ON3, OFF3. If you get out of sequence, the display will
flash a warning.
SWITCHING
– start of first timed period
ON 1
– end of first timed period
OFF 1
– start of second timed period
ON 2
– end of second timed period
OFF 2
– start of third timed period
ON 3
– final switch-off of the day
OFF 3
The engineer has set your program and timings – you
won't need to do anything else. Just keep this guide in a
safe place for future reference.
DAY-TO-DAY VARIATIONS
Sometimes you might need to change the way you use your
central heating or hot water temporarily – perhaps due to an
unusually cold day, or exceptional demand for hot water.
Here's how to do it – without affecting your program.
Switching on and off
On the front of the programmer there are two Advance buttons
– one for central heating and one for hot water. They allow you
to switch either on or off, irrespective of the program. So if the
heating is off, and you want warmth now – press Advance to
switch it on, and it will stay on until the end of the next OFF
period. Or if the hot water is on and you don't need it, press
Advance and it will go off until the beginning of the next ON
period.
Over-riding the program
On each side of the display there are four operating modes –
one group for central heating, the other for hot water. You can
change modes with immediate effect by using the appropriate
SELECT button. This won't alter the timings in your program,
which you can return to by selecting TIMED.
OFF
= continuously off.
TIMED
= on for up to 3 periods a day.
ONCE
= on for 1 period a day, from the start of ON1
to the end of OFF3.
ON
= continuously on.
THE LP241Si 24hr ELECTRONIC PROGRAMMER
LP241Si – a 24hr program, with central heating and hot water
working independently for up to 3 heating periods each day,
and every day the same.