Alen BreatheSmart 75i Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alen BreatheSmart 75i. Alen BreatheSmart 75i 12 pagina's. Hepa air purifier
Ook voor Alen BreatheSmart 75i: Gebruikershandleiding (11 pagina's), Gebruikershandleiding (12 pagina's), Gebruikershandleiding (12 pagina's)

Alen BreatheSmart 75i Gebruikershandleiding

KNOW YOUR AIR PURIFIER

When using the air purifier for the first time in a room, we recommend that you use a higher
fan speed like speed four (4) or Turbo (T), for at least two hours in order to clean the room's air
initially. Then, we recommend that the air purifier run continuously on speed two (2) or three (3)
or be set on Auto mode.
Features
True HEPA filtration captures dust, allergens, and airborne pollutants
5 fan speeds with a two, four, and 12+ hour timer to control air circulation
Filter change indicator light keeps replacements on schedule
Simple and intuitive touch button controls
Auto-off safety feature when front cover is removed
CARE & MAINTENANCE
Turn The Lights Off/On
To turn the lights off on your unit, touch the
will not turn off. Touch any button to turn the lights back on, or touch the
second time to turn the unit off completely.

Replacing The Filter

The Filter Indicator has 3 lights: Green, Yellow* and Red. The Green light will be illuminated for
most of the life of the filter. Yellow light will come on shortly before your filter should be replaced.
This is the ideal time to order a new filter. You may order a new filter at www.alen.com/filters or
by calling 1-800-630-2396. The Red light will be illuminated when it is time to replace the filter.
The filters used in Alen Air Purifiers are not designed to be washed, cleaned* or otherwise
reused. Over time, the filters become overloaded with particles, decreasing their filtration per-
formance. We recommend regular filter replacements to extend the life of your air purifier and
maximize performance.
The screen layer of the filter, known as the Pre-Filter, captures large dust and hair. This layer
can be vacuumed periodically to maintain efficient operation of the unit.
Reset the Filter Indicator
After replacing the filter, hold the FILTER button down for 5 seconds. The Red light will be reset
to Green.
Cleaning Instruction: Control Panel
To avoid scratching the control panel, do not use abrasive/caustic cleaning solutions or scrub-
bing pads. With the unit unplugged, dampen a clean towel with soap and water to clean the
control panel, then dry gently with a soft cloth or paper towel. Glass cleaner (e.g. Windex) is
also OK. To avoid damaging electronic components* DO NOT allow liquid to seep into the unit.
Power Button. The lights will go out but the unit
www.alen.com 1-800-630-2396
Power Button a
6