Alen Paralda Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alen Paralda. Alen Paralda 10 pagina's. Hepa air purifier
Ook voor Alen Paralda: Gebruikershandleiding (12 pagina's), Gebruikershandleiding (9 pagina's), Gebruikershandleiding (7 pagina's), Gebruikershandleiding (12 pagina's)

How to Replace the Filter

Lift the filter cover.

Turn the plastic locking mechanism that holds

the filter in place to unlock the filter.

Lift straight up on the filter cartridge handle

and remove completely.

Insert the new filter.

Lock the new filter in place.

Reset the filter replacement indicator – when

the cover is open, using the tip of a pen, press

and hold the pen in the Filter Reset button for

three seconds.

The Paralda can be programmed to run at certain fan speeds at three pre-set times throughout

the day. This is done in the program mode. When in the Program Mode, one of the three

settings directly below the clock will be illuminated (1, 2, or 3). When in Manual Mode, the

settings are not illuminated and the air purifier will operate continuously at the current fan

speed. This is your visual indication for which mode you are using. When first turned on the

air purifier will be in manual mode. To change back to Manual Mode from Program Mode

simply press the unit off and turn back on.

To Program Your Paralda

Press and hold PGM key for two seconds to enter the setup mode. The unit will beep and

the clock with then blink. The current time will turn on.

Press +/- to change the time.

Press the PGM key to accept the current time. The current time turns off and the setting 1

icon turns on. The clock will start blinking.

Press +/- to change the time for setting 1.

Press the PGM key to accept the time for setting 1.

Press the SPEED button to select the fan speed for setting 1. This is the speed you want

the fan to run for the first preset time of the day.

Press the PGM key to accept the fan speed for setting 1.