Alen T300 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Alen T300. Alen T300 12 pagina's. Alen t100: user guide
Ook voor Alen T300: Gebruikershandleiding (14 pagina's), Gebruikershandleiding (12 pagina's)

Pagina afdrukken

USING YOUR AIR PURIFIER

Operating Your Unit:

Plug your air purifier into a grounded outlet.

Press POWER to start the air purifier. When your unit is on the control panel screen will

light up. To stop the air purifier press POWER and the screen will turn off.

Press SPEED and watch the indicator lights until desired fan speed is achieved.

Fan Speed

Level 1

Level 2

Level 3

Level 4

Press TIMER to have the air purifier automatically turn off in a set amount of hours.

Up to twelve hours.

Select ION to activate the ozone safe built-in ionizer. Activation of the IONIZER can

enhance your unit's ability to remove airborne particles (similar to the way dust is

attracted to a TV screen) and keep the air fresh. Press ION again to turn off.

Filter replacement indicator – Light bar will progressively illuminate as filter collects

particles. There are two green, two yellow and one red bar. Each bar represents

approximately one month of continuous operation. Once all five bars are fully illuminated

(red being the last), it is time to change the filter.

After changing the filter, RESET the filter indicator by holding down RESET while the

unit is ON until the illuminated bars disappear. To reach the button, use a pin or

extended paperclip.

Press UV to activate the built-in ultraviolet light. Press UV again to turn off.

Result

Quietest operation

Basic cleaning power

Moderate cleaning power

Maximum cleaning power