Advanced ICE 1319-1 Handmatig - Pagina 6
Blader online of download pdf Handmatig voor {categorie_naam} Advanced ICE 1319-1. Advanced ICE 1319-1 7 pagina's. Holden, chevrolet & gmc caravan/trailer camera system
Pagina afdrukkenCaravan/Trailer Installation Schematic #2
HMI Bypass Module
On the VSW1305, please
swap the cable with the
black connector to the
NTV-HAR300
Blue/White
not used
Connect to
ground
HMI Bypass Module
20-PIN
Camera video signal
(grey/yellow wire)
Camera video ground
(white/blue wire)
swap
Video 2 Input
VSW
1305
Red/White Video 1 Trigger
HMI Bypass
PLEASE NOTE: Wire colours in factory parts may be different to
what is pictured here, please refer to the Pin location
Power Harness
connected to the GMC
Harness
Cut factory camera
wires and join as
shown
Screen
Vehicle
Video 1 Input
Join wires
Switched Power
Typical
Descrip on
PIN #
Wire Color
6
RVC (+) signal
Gray/Yellow
18
RVC (-) shield
White/Blue
• Locate pins 6 & 18, cut these wires in half
Connect to the AUX/Front
RCA of the Power Harness
Connected to Caravan
Camera
Connect to the Female RCA
of the V2P-II
RCA Y ADAPTER
Part No. WA7058
12v (+)
ACC Input
Video Output
Connect to
ground
NTV-HAR283
Do not use for vehicles
with HMI Bypass Unit
1303
V2P-II
Page 6