Drazice OKC 200 NTRR / BP Bedienings- en installatiehandleiding - Pagina 4

Blader online of download pdf Bedienings- en installatiehandleiding voor {categorie_naam} Drazice OKC 200 NTRR / BP. Drazice OKC 200 NTRR / BP 18 pagina's. Stationary water heaters
Ook voor Drazice OKC 200 NTRR / BP: Bedienings- en installatiehandleiding (17 pagina's), Bedienings- en installatiehandleiding (12 pagina's), Bedienings- en installatiehandleiding (19 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (20 pagina's), Bedienings- en installatiehandleiding (18 pagina's), Bedienings- en installatiehandleiding (13 pagina's)

1 APPLIANCE TECHNICAL SPECIFICATION

The water heater as well as the storage tank (thereinafter the appliance) is designed for accumulation

heating of service water using electricity or thermal energy via an exchanger. Water is heated by an electric

element or a heat exchanger in an enamelled thermally insulated vessel at the time defined by the power

supplier. The element is at the time of heating controlled by a thermostat the temperature of which can be

adjusted continuously (within the range between 5°C and 74°C). Once the selected temperature is reached,

heating interrupts automatically. Water accumulated in the vessel is then used for the consumption. The

appliance keeps constant pressure of water from the water main. Is the combination faucet hot water valve

opened, water from the water supply conduit pressed out by cold water pressure flows out of the

appliance. Hot water flows out through the top part, and water flowing in remains in the bottom part of the

appliance. Pressure principle allows hot water withdrawal at any place from the appliance (Figure 5).

Consumption of hot water in households depends on the number of people, amount of

sanitary equipment, length, diameter and insulation of piping in the flat, or on individual

habits of users. The cheapest option of water heating comes at the time when the

electricity rate is reduced.

Find out in what time intervals your electricity supplier provides reduced tariff and,

depending on that information, select relevant volume and power input of the appliance so

that your hot water consumption covered the needs of your household.

Hot utility water reservoir is insulated by means of top-quality polyurethane foam with zero

CFCs content. Adjust the temperature of the appliance's thermostat to that level only that

you need to run your home. Thus you will reduce electricity consumption, as well as the

amount of lime sediments on the walls of the receptacle and on the heat exchanger.

- 4 -