Dreadbox TYPHON Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dreadbox TYPHON. Dreadbox TYPHON 17 pagina's. Analog

3.Direct analog engine controls (left side)

Typhon's left side is dedicated to a set of 8 controls for quick and easy sound sculpting.

Wave: This controls the waveform, amplitude, and routing of the two oscillators. With just a single knob, you

can get the most interesting and useful combinations that these oscillators can offer. While rotating the knob,

the selected waves fade into the adjacent wave and oscillator settings, instead of just switching abruptly.

VCO1 is in a square wave, and VCO2 is off. To the left

and right of this wave you have a variable pulse width

VCO1 is in a square wave and

VCO2 in a triangle wave

VCO2 in a saw wave

VCO1 is off, and VCO2

is in a triangle wave

is in a saw wave

VCO1 is in a square wave and VCO2

VCO1 is in a saw wave and

triangle wave is modulating it

VCO2 is also in a saw wave

Tune 2: Controls the tuning of the second oscillator

Cut off: Controls the filter's initial cut off frequency

Reson: Controls the amount of filter feedback (Q or resonance)

EG level: Sets how much the filter ADSR envelope modulates the filter's Cutoff

Filter Time: Scales the initial filter ADSR envelope settings from 10 times as slow, up to 6 times as fast.

Amp Time: Scales the initial amp ADSR envelope settings from 10 times as slow, up to 6 times as fast.

Volume: Sets the master level. Important to note, that this is a global setting and the only control that cannot

be stored in a preset.

Filter EG and Amp EG button: Lets you enter the ADSR edit mode. Select the filter or the amp ADSR by press-

ing the "shift" button. Use the sliders to edit the envelope. By pressing it again, will exit the ADSR edit mode.