Anchor LIB-7500MU2 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anchor LIB-7500MU2. Anchor LIB-7500MU2 8 pagina's. Platinum sound system

Liberty Platinum Sound System Owners Manual

CONNECTING MULTIPLE SOUND SYSTEMS

UNPOWERED COMPANION SPEAKER

One powered Liberty sound system and one unpowered Liberty companion

speaker. Using a speaker cable (SC-50NL) connect the SPEAKER OUTPUT jack

on the powered system to the IN jack on the unpowered speaker.

NOTE: AC power is not required for an unpowered companion speaker.

POWERED SOUND SYSTEMS

Two or more powered Liberty Sound Systems. Using a speaker cable (EX-50PP)

connect the LINE OUT jack on the first powered Liberty to the LINE IN jack on

the second powered Liberty. Set second Liberty volume to maximum so full

volume control will be at the first or primary sound system.

For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com

CORRECT SYSTEM PLACEMENT

CONTROLLING FEEDBACK

Feedback, a howling noise or shrill sound, is self-generated by the sound system. It's caused by

a microphone picking up the sound coming from the speaker and then re-amplifying it. Once a

feedback loop starts, it continues until the system is adjusted.

FEEDBACK CAUSES

• Microphone too close, pointing towards

or in front of speaker

• Volume setting is too loud for room

• Sound reflecting off hard surfaces

AVOIDING & ELIMINATING FEEDBACK

• Point microphone in a different direction

• Keep microphone away from the speaker

• Place speaker in FRONT of the microphone

• Reduce the sound system volume levels

CAUTION: Feedback can damage your equipment & may be hazardous to hearing.

MADE IN USA

SIX YEAR WARRANTY

WRONG SYSTEM PLACEMENT