Anchor 10’ Montage-instructies - Pagina 2

Blader online of download pdf Montage-instructies voor {categorie_naam} Anchor 10’. Anchor 10’ 4 pagina's. All purpose canopy wide systems
Ook voor Anchor 10’: Montage-instructies (4 pagina's)

Pagina afdrukken
PARTS
SIDE POLE
CENTER POLE
STAKES
BAG WITH TOP
BAG FOR POLES
*
REFER TO CAUTION STATEMENT #2 FOR IMPORTANT WARNING
ABOUT NUMBER OF STAKES SUPPLIED. (SEE BACK PAGE OF THIS
MANUAL)
STAKE HOLD LOADINGS USED FOR THE CALCULATION OF THE QUAN-
TITY OF STAKES IS --- LBS. PER STAKE. THE INSTALLER MUST USE THE
LOCAL SOIL CONDITIONS TO CALCULATE THE ACTUAL NUMBER OF
STAKES REQUIRED AND IS RESPONSIBLE FOR THE STAKING PATTERN
AND CONFIGURATION.
20' x 20' canopy used as example. Spread
drop cloths and unroll canopy at exact
position of desired ¿ nished assembly. Any
sharp objects which must remain on site
under the canopy should be padded and
taped.
Assemble side poles and lay straight out
from each pole hole in canopy. Drive a
stake 1'-0" in from the end of each pole.
The stake must be driven through the ring
attached to each guy rope as shown.
2
CANOPY SIZE
12' x 12'
10' x 10'
THROUGH
20' x 20'
4
8
1
1
*
*
8
12
1
1
1
1
20' x 30'
20' x 40'
10
12
2
3
*
*
14
16
1
1
1
1