Anchor F3 Handleiding voor installatie-instructies - Pagina 10
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Anchor F3. Anchor F3 16 pagina's. Frame tent
Pagina afdrukken
STEP 8
Raise one side with Frame Lifts
Attach uprights to base plates.
Attach uprights to weldments on one side once
the side is raised to the appropriate height.
When one side has all uprights attached, move
frame lifts to the other side, and raise frame until
the end uprights can be attached.
After these uprights are installed, frame may
need to be lowered slightly so that the final side
can have uprights attached.
STEP 9
Stake and Guy tent
Important Note:
Guys must be staked out at
2'-0" from uprights as shown.
Fabric is not yet
tensioned to frame.
Stakes are all 1" x 30".
(1) stake required per
base plate.
10
2'-0"
Place frame lifts as shown and
attach to eave purlins.
Snap one guy to each U bolt
on weldments. Corners are
staked out at 45° as shown.
Figure 8
Figure 9