Anchor Navi-Trac Lite Handleiding voor installatie-instructies - Pagina 3

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Anchor Navi-Trac Lite. Anchor Navi-Trac Lite 20 pagina's. Frame tent 30' wide system

Pagina afdrukken

30' NAVI-TRAC LT HIP END FRAME

INTRODUCTION

The NAVI-TRAC LT can be configured as a Hip End, Gabled End,

Hex End or Clearspan unit, as described below:

30' NAVI-TRAC LT HIP END UNITS

The 30' wide NAVI-TRAC LT frame configuration is based on the

hip roofed square tent shown at right. Hip bars connect corners

to the peak, and rafters connect eave bars to the peak. The

square tent can be extended into a rectangle by adding 10' or 15'

bays consisting of parallel beams connected to the hip ends and

to each other by ridge bars, purlins, and eave bars.

30' NAVI-TRAC LT GABLED END UNITS (AND HIP-GABLED & HEX-GABLED UNITS)

The 30' LT can also be supplied and installed as a gabled end tent consisting of a series of parallel beams intercon-

nected by ridge bars, purlins and eave bars (see the Appendix I). The hip end, gabled end & hex end versions of

the LT are guyed units that depend on staked, ratcheted guy webs at legs and corners for their stability. All three ver-

sions are supplied with uprights adjustable from 8 ft to 10 ft high, with the gabled end unit requiring at least one bay of

X-cabling.

30' NAVI-TRAC LT CLEARSPAN (CS) UNITS (Gabled End Configuration only)

By adding appropriate additional X-cabling, and hinged Base Plates, the 30' NAVI-TRAC LT can be converted into the

30 ft NAVI-TRAC CS, a clearspan unit which is installed without external guy webs (see Appendix 2).

30'

75'

SQUARE TENT

FRAME

(MAX)

X-Cabled bay (upright & rafter

x-cables) must be added such

that there are no more than 6

open bays between x-cabled

bays or hip ends. Shown here

for clarity only.