Bosch 52318 Gebruiksaanwijzing/veiligheidsinstructies - Pagina 13
Blader online of download pdf Gebruiksaanwijzing/veiligheidsinstructies voor {categorie_naam} Bosch 52318. Bosch 52318 44 pagina's. Cordless jigsaws
Ook voor Bosch 52318: Gebruiksaanwijzing/veiligheidsinstructies (44 pagina's), Gebruiksaanwijzing/veiligheidsinstructies (37 pagina's)
Pagina afdrukken
CHARGING BATTERY PACK (30 MINUTE DUAL BAY-BC230)
INDICATORS, SYMBOLS AND MEANING
If the indicator lights are "OFF", the charger
is not receiving power from power supply
outlet.
k_
_t
If the red
indicat°rlight
is
"ON",
the battery
pack is too
hot or cold for fast-charging.
The charger
will switch to trickle charge,
until
a suitable
temperature
is reached,
at which
time the charger
will switch
automatically
to
fast-charging.
I-_.- {
_1
If the red indicat°r
light
is
-
-
"BLINKING",
the battery
pack
cannot
accept
a charge
or
the contacts
of the charger
or battery
pack
are contaminated.
Clean the contacts
of the
charger
or battery
pack only as directed
in
these
operating
instructions
or
those
supplied
with your tool or battery
pack.
_
_[i-_
If the green
indicat°r
light is
"
"BLINKING",
the battery
pack
is being
fast-charged.
Fast-
charging
will automatically
stop when
the
battery pack is fully charged.
I I
,,i
1If the green
indicator
light is
_|"ON",
the charger
is plugged
= Jin
but the battery
pack is not
inserted,
or the battery
pack is fully charged
and is being trickle charged.
Plug charger
cord into your standard
power
outlet. Before
inserting
battery
pack, remove
protective
cap, then
insert battery
pack into
charger (Fig. 9).
The charger's
green indicator
light will begin to
"BLINK".
This
indicates
that the battery
is
receiving
a fast charge.
Fast-charging
will
automatically
stop when the battery
pack is
fully charged.
When
the indicator
light stops
"BLINKING"
(and
becomes
a steady
green
light)
fast
charging
is complete.
The battery
pack may be used even though
the light may still be blinking.
The light may
require more time to stop blinking
depending
on
temperature.
When
you
begin
the
charging
process
of the battery
pack,
a
II=l[_]
BATTERY
PACK
steady
red light could also mean the battery
pack is too hot or too cold.
The purpose
of the green light is to indicate
that the battery
pack is fast-charging.
It does
not indicate
the exact
point
of full charge.
The light will stop blinking
in less time if the
battery
pack was not completely
discharged.
When
charging
several
batteries
in
sequence,
the charge
time
may
slightly
increase.
When
the battery
pack
is fully
charged,
unplug
the charger
(unless
you're
charging
another
battery
pack)
and slip the battery
pack back into the tool.
To prevent
fire or injury when
batteries
are
not in tool or charger, always
place protective
cap onto end of battery pack.
PROTECTIVE
CAP
--CHARGER
RED
.IGHT
GREE1
LIGHT
-13-