Anchor bigfoot Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Anchor bigfoot. Anchor bigfoot 2 pagina's. Line array sound system
Ook voor Anchor bigfoot: Gebruikershandleiding (13 pagina's), Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's)

Pagina afdrukken

BIGFOOT LINE ARRAY SOUND SYSTEM

ANCHOR AUDIO WIRELESS MICROPHONES

WIRELESS MICROPHONE CHANNEL SELECTION - BUILT-IN RECEIVER

1. Choose any available wireless channel from 1 thru 16

2. Set the WIRELESS CHANNEL SELECTION knob to the channel you chose in step 1

WIRELESS 1 CHANNEL

WIRELESS 2 CHANNEL

SELECTION

WIRELESS 2 RX

WIRELESS 1 RX

INDICATOR LIGHTS

WIRELESS 1

WIRELESS 2

VOLUME CONTROL

OPERATING THE WIRELESS MICROPHONE TRANSMITTER

CHANNEL SELECTION -

HANDHELD TRANSMITTER

1. Unscrew battery cover on bottom of microphone

2. Set the CHANNEL SELECTOR dial to match the

channel setting of your receiver

3. Replace battery cover and tighten firmly

The wireless RX indicators will light (only one indicator will light at a time) when the wireless signal is

being transmitted and received.

BATTERY INFORMATION FOR BIGFOOT LINE ARRAY

AC OPERATION & BATTERY CHARGING

Bigfoot sound systems include an automatic charging system designed to properly charge and maintain the systems

built-in batteries. To charge batteries, plug the system into an AC outlet. The BATTERY LEVEL INDICATOR will light when

charging. The CHARGE STATUS LED will light bright red which indicates charge process has begun and green indicates

full battery. Charge your system overnight to replenish drained batteries.

SYSTEM STORAGE & BATTERIES

Fully charge batteries before storage. For extended periods of storage, either leave powered off system plugged into an

AC outlet or charge the system at least once each month for a minimum of 24 hours.

BUILT-IN BATTERTY MAINTENANCE

To preserve battery life, the built-in batteries MUST be FULLY charged before te first use. Regardless of length of

operation, it is recommended that batteries be fully charged as soon as possible after each use.

If you have two wireless receivers,

repeat above for the second

receiver. Remember, each receiver/

transmitter pair must be set

to different channels to avoid

interference.

CHANNEL SELECTION -

BELTPACK TRANSMITTER

1. The channel selection dial is located on the

side of the transmitter

2. Set the CHANNEL SELECTOR dial to match the

channel setting of the receiver

3. Adjust the GAIN dial for proper voice pickup

OPERATING THE BLUETOOTH TRANSMITTER

POWERING UP THE BLUETOOTH

1. Turn on the Bluetooth with the volume knob (it

will make a boot up noise)

2. Before hooking up your device, take a moment

to go over what the different LED light signals

mean:

No light: indicates either Blutooth is off,

or it is in sleep mode and cannot connect

Blinking light: indicates pairing mode,

this is when you should connect

Solid light: indicates connection, your

device is connected

PAIRING A DEVICE

1. Press the pairing button (it will acknowledge pairing mode with a beep) this mode will last 90 seconds. If no

device is paired within the 90 seconds, the Bluetooth will enter sleep mode.

2. When the Bluetooth module is in pairing mode, it is discoverable and will show up on the selection list of your

Bluetooth enabled device.

3. Select the Bluetooth titled "Anchor Audio" to pair your device with the Anchor Audio sound system.

4. If a previously paired device is in range and discoverable, the unit should automatically make a connection,

however this may depend on your individual device.

5. When the device has successfully connected to the Bluetooth, the Bluetooth module will beep to signify

connection and the Blue LED will become solid.

6. Now you can play audio from your Bluetooth device to the Anchor Audio portable sound system. You can adjust

volume by using the Bluetooth module's knob, as well as the volume control on your device.

FREQUENTLY ASKED QUESTIONS

What is the range of Anchor Audio Bluetooth?

The Anchor Audio Bluetooth range is 100 ft. line of sight.

My sound system is auto-connecting to a device, but I don't know which one. Can I disconnect directly

from the sound system?

Yes, if your unit is auto-connecting to a device that you cannot identify (for example, you're in a room with other

people who have connected to the unit in the past), you may need to manually disconnect that pair from the sound

system itself. Just hold the 'pairing' button for two seconds, and the sound system will disconnect from the device it

is currently connected to and immediately go into pairing mode.

What kind of modes can my phone be in that allow the Bluetooth connection to still work?

Bluetooth will work in modes such as Airplane mode and Do Not Disturb (or the equivalent). Just be sure to still have

your Bluetooth setting turned on. To simplify the process, put your phone in the desired mode first, and then secure

the Bluetooth connection as moving into these modes may cause disconnection.

What happens if I get a phone call?

Incoming and outgoing calls should pause the audio stream. The audio from the call should not be transmitted via

Bluetooth. To avoid interrupting audio, set device in Airplane mode, then enable Bluetooth, ensure your connected,

and you should not encounter any interruptions in your audio stream.

*Bluetooth connection and behavior may depend on your individual device settings and capabilities, all testing was done using an

Apple iPhone.

NOTE: All Anchor Audio sound system Bluetooth connections will be named "Anchor Audio." If

you're using multiple systems, be sure to keep track of each connection.

800.262.4671 • anchoraudio.com

VOLUME/POWER KNOB

PAIRING

VOLUME

INDICATOR LIGHT

PAIRING BUTTON

MADE IN THE USA

SIX YEAR WARRANTY