Anchor Explorer Pro Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anchor Explorer Pro. Anchor Explorer Pro 13 pagina's. Anchor audio portable sound system
Ook voor Anchor Explorer Pro: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (8 pagina's)
Pagina afdrukken
- 1. Troubleshooting Guide
- 2. Important Safeguards
- 3. Specifications
- 4. Getting Started
- 5. Wireless Microphone Operation
- 6. Wireless Operation
- 7. Battery Operation
- 8. Battery Level Indicator
- 9. Charging Batteries
- 10. Replacing Transmitter Battery
- 11. General Operation
- 12. Line Inputs
- 13. Line Outputs
- 14. Speaker Output
Battery Level Indicator
The Explorer PRO sound system features a built in battery level
indicator that shows the battery level in three steps at power on.
Charging Batteries
The system is equipped with a built in rapid charger, designed to
quickly charge and maintain the battery. Charge indicator light:
Replacing Transmitter Battery
Handheld Transmitter:
NOTE:
Transmitter
power switch
must be in the
OFF position
when
changing
batteries
Body-pack Transmitter:
6
1. GREEN: Battery is fully charged.
2. YELLOW: Battery level is depleted.
3. RED: Battery level is becoming low (about 15-30 minutes
before automatic system shutoff).
1. YELLOW Flashing: When AC power is connected indicates
that the unit is testing the battery (about 30 seconds).
2. YELLOW Solid: Battery is in good condition and rapid
charging has begun.
3. GREEN: Battery is fully charged.
4. RED: This indicates a battery fault, please contact Anchor
Audio customer service department at (800) 262-4671.
1. Unscrew battery compartment cover
on lower end of mic.
2. Install 2 fresh 'AA' alkaline batteries.
3. Replace the battery cover.
1. Slide open battery cover on front of transmitter box.
2. Install 2 fresh 'AA' alkaline batteries.
3. Close the battery cover.
BATTERY OPERATION
Place batteries into slot
and slide forward