Anchor Explorer Pro Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Anchor Explorer Pro. Anchor Explorer Pro 8 pagina's. Anchor audio portable sound system
Ook voor Anchor Explorer Pro: Gebruikershandleiding (8 pagina's), Gebruikershandleiding (4 pagina's), Gebruikershandleiding (13 pagina's)
Pagina afdrukken
Explorer Pro Sound System Owners Manual
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
No Sound (power LED off)
Charge Indicator LED off
No Sound (power LED on)
Shortened Battery Life
Distorted Sound
Excessive Hum or Noise
CONDITION
No Sound (RX Indicator: ON)
No Sound (RX Indicator: OFF)
NEED MORE HELP? View demonstration videos on proper system setup and
EXPLORER PRO TECHNICAL SPECIFICATIONS
Rated Power Output
75 watts AC / DC mode
Max SPL @ Rated Power 109 dB @ 1 meter
Frequency Response
80 Hz – 16 kHz
AC Power Reqs.
90 – 264 VAC, 50/60 Hz
Dimensions (HWD)
16.5" x 10.5" x 10"
(42 x 27 x 25 cm)
Weight (AC/DC)
23 lbs / 10.4 Kg
Weight (AC only)
16 lbs/ 7.25 Kg
Inputs
Lo-Z (1 k Ω) , balanced, XLR
Microphone
(2 combo jacks)
12 VDC condenser mic phantom
pwr
Hi-Z (10 K Ω) , unbal, 1/4" phone
POSSIBLE SOLUTION
• turn POWER switch ON
• charge battery or plug in AC cord
• leave plugged in for 48 hours to repair battery
• check for output from source
• make sure all cables are completely plugged in
• turn up volume control of input used
• remove plug from speaker output if not using external speaker
output
• charge battery fully; if battery life continues to deteriorate,
contact Anchor Audio customer service: 800.262.4671
• lower system volume control
• use shielded cables
• use balanced microphone
HAVING TROUBLE WITH YOUR WIRELESS SYSTEM?
(WIRELESS MODELS ONLY)
POSSIBLE SOLUTION
• set MUTE switch to on (handheld mic only)
• turn up WIRELESS volume control
• make sure mic is plugged into body pack transmitter
• push mic power button
• turn Explorer PRO POWER switch on
• make sure transmitter power switch is on
• set receiver and transmitter to same channel
• replace battery in transmitter
operation at our website - www.anchoraudio.com
Auxiliary
Sensitivity For Rated Output
Line
Mic (unbal & bal)
Outputs
Line (post fader)
Speaker
(Specifications Subject to Change Without Notice)
For System Setup & Operation Videos Visit Our Website: www.anchoraudio.com
Hi-Z (10 k Ω) , unbal, 1/8" & 1/4"
-8.4 dBV (380 mVrms)
-49 dBV (3.63 mVrms)
Lo-Z, buffered, 1/4" balanced
4-pole Neutrik Speakon® jack
ANCHOR AUDIO CUSTOMER SERVICE
800.262.4671
FOR ADDITIONAL INFORMATION
visit www.anchoraudio.com
MADE IN USA
SIX YEAR WARRANTY
8