Anchor ACCLAIM Snelstarthandleiding

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Anchor ACCLAIM. Anchor ACCLAIM 2 pagina's.

Pagina afdrukken
Anchor ACCLAIM Snelstarthandleiding
BATTERY INFORMATION
AC OPERATION & BATTERY CHARGING
The Acclaim include an automatic charging system designed to properly charge and maintain the system's
built-in Lithium Ion battery. To charge batteries, plug the system into an AC outlet and operate as normal
while built-in batteries are charging. While unit is on, the battery fuel gauge will indicate the battery level. The
BATTERY INDICATOR LED will show solid red light when charging and will show green light when charging is
complete. Charge system overnight to replenish drained batteries.
BATTERY MAINTENANCE & STORAGE
In order to ensure a long battery life, we encourage the following best practices for Lithium Ion battery
maintenance and storage. Do not block any ventilation openings. When your lectern is not in use, it should
be stored in a cool dry place. Do not expose your lectern to excessive heat, flames, or fire. Unplug the lectern
during lightning storms. If storing lectern for an extended period of time, leave speaker unplugged.
BATTERY SAFETY
Refer all servicing to qualified personnel. Do not attempt to remove the rechargeable Lithium Ion battery from this
product. The battery used in this device may present a risk of fire or chemical burn if mistreated. Please recycle or
dispose of your speaker and/or battery properly based on the laws and rules of your municipality. Do not incinerate.
HAVING TROUBLE WITH YOUR SOUND SYSTEM?
CONDITION
POSSIBLE SOLUTIONS
• Turn POWER switch ON
No Sound (Power LED: OFF)
• Check battery level, charge battery, or plug in AC cord
• Ensure the gooseneck mic is properly inserted into the XLR input
• Check your source audio and turn up volume of source audio
• Make sure all cables are completely plugged in
No Sound (Power LED: ON)
• Turn up volume control of input used
• Check battery level of microphone
Wireless Mic will not connect to System
• Un-pair all microphones from the system then re-pair the microphones
• Check the Mute button on the microphone or belt pack
Connected wireless Mic but No Sound
• Raise volume on the microphone and system
(Solid Green LED)
• Check battery level of microphone and system
• Check battery level of microphone and system
• Re-position system away from any possible interference sources
• Raise system onto a higher level (speaker stand)
Poor Wireless Range /
• Minimize obstructions between the system and wireless microphone
Poor Wireless Audio Quality
• If wireless range continues to be poor, call Anchor Audio Tech Support
• Check battery level, charge battery, or plug in AC cord
• Lower system volume
• Lower source audio volume
Distorted Sound
• Wireless belt pack - ensure Mic and/or Line Level setting is correct
• Lower the volume on the microphone (handheld or belt pack)
• Do not stand within at least 10 feet in front of the speaker with
Excessive Feedback (Squelching)
the mic(s)
• Use shielded cables (Example: EX-50PPS)
Excessive Hum or Noise
• Use a balanced microphone
NEED MORE HELP?
anchoraudio.com | 800.262.4671 | [email protected]
QUICK START MANUAL
ACCLAIM
For a complete Owner's Manual, visit anchoraudio.com
Please check your new unit carefully for any damage which
may have occurred during shipment.
*Please keep the product box(es) that your Anchor Audio product(s) was
shipped in, so it is available in the event the product(s) need to be shipped
back to Anchor Audio for any reason.