Carlsbro BLACK BOX Specificaties - Pagina 4

Blader online of download pdf Specificaties voor {categorie_naam} Carlsbro BLACK BOX. Carlsbro BLACK BOX 4 pagina's. 2.1 pro-audio system pa & amplification systems

Pagina afdrukken

FRONT PANEL FEATURES:

1. Power LED: This blue LED illuminates when the unit is supplied

with the correct mains voltage and switched on. When switched

off, the LED will slowly extinguish.

2. Volume: This control sets the overall output level of the Black Box.

3. Treble: This is used to control the level of treble or high frequency

sound. When the control is centered there is no effect on the

sound. Turning the control to the left reduces the amount of treble,

and turning the control to the right will increase it.

4. Bass: This works the same as the Treble control but affects the

Bass or low frequencies.

5. Balance: This control sets the output levels to the two satellite

speakers, when the control is turned to the right, the right signal

will be amplified more than the left, until the left speaker is silent.

Turning to the left has the opposite effect.

SIDE PANEL FEATURES:

6. MIC2: This is an unbalanced high impedance ¼"

jack input suitable for microphones. Use a good

6 6

quality shielded signal cable to connect a microphone

to this input.

7. MIC1: See MIC 2 (1).

8. MIC-VOL: This level control sets how loud the

signal from both microphone inputs is in relation to

the overall output volume. Turning the control to the

right increase the level and vice versa.

9. ECHO: This control adds a small echo to the

microphone input to add the effect of being in a

large room. When the control is turned all the way

to the left the echo is turned off, as you turn it to the

right the amount of echo added to the overall sound

is increased.

REAR PANEL FEATURES:

Note ; All inputs to the black box system should be made using

good quality shielded signal cables.

10. Phono Input: This stereo input can be connected to a wide

range of audio equipment using phono connectors, which are

widely used in consumer audio, such as Hi Fi systems, DVD

players and games systems. The red socket is for the right

channel and the white socket is for the left channel.

11. Mini Jack (3.5mm) Input: This stereo input allows easy

connection to equipment using 3.5mm jacks, such as MP3

players, personal CD players and laptop computers.

12. Left Jack (1/4") Input: This mono input is provided for connection

to professional audio equipment such as keyboards and mixing

desk line outs. Use this socket only if you want to connect a

mono signal to your system.

13. Right Jack (1/4") Input: When this connection is used the unit

changes from mono operation to stereo when used in

conjunction with the left jack input (3)

14. Mains Switch: This turns the AC mains power to the unit on or off.

NOTE: The unit is not isolated from the mains supply until the

power cord is removed.

15. IEC Input Socket: Connect the supplied IEC mains lead here.

16. Fuse Holder: Should the mains fuse need replacing, remove the

AC power lead from the supply, unscrew the fuse holder and

remove the fuse. Always replace the fuse with the same type

and rating printed on the rear panel of your amp. If the

replacement fuse blows immediately then contact your local

service agent. DO NOT fit a higher rated fuse.

NOTE: ALWAYS DISCONNECT THE UNIT FROM THE MAINS

SUPPLY BEFORE CHANGING THE FUSE.