Electrolux ESF 68070 Gebruikershandleiding - Pagina 18
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Electrolux ESF 68070. Electrolux ESF 68070 20 pagina's.
Ook voor Electrolux ESF 68070: Gebruikershandleiding (20 pagina's)
Pagina afdrukken
18 electrolux
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it.
INSTALLATION
Installation under a counter
Put the appliance adjacent to a water tap
and a water drain.
Remove the appliance worktop to install it
under a sink unit or a kitchen worktop.
Make sure that the dimensions of the re-
cess agree with the dimensions in the pic-
ture.
How to remove the appliance worktop
1. Remove the rear screws (1).
2. Pull the worktop from the behind of the
appliance (2).
3. Lift the worktop and move it from the
front slots (3).
.
4. Use the adjustable feet to adjust the lev-
el of the appliance.
5. Install the appliance under the kitchen
worktop. Do not squash or bend the
water hoses during the installation.
To adjust the level of the appliance
A correct level of the appliance lets the door
to close and seal correctly.
With an incorrect appliance level, the door
does catches on the sides of the cabinet.
Loosen or tighten the adjustable feet to
make the appliance level.
Water drain connection
Connect the water drain hose to:
• The sink spigot and attach it under the
work surface. This prevents that the
waste water from the sink goes back into
the appliance.
• A stand pipe with vent-hole. The internal
diameter must be minimum 4 cm.
max 85 cm
min 40 cm
Remove the sink plug when the appliance
drains the water to prevent that the water
goes back into the appliance.
The drain hose extension must not be lon-
ger than 2 m. The internal diameter must
not be smaller than the diameter of the
hose.
If you connect the water drain hose to a
trap spigot under the sink, remove the plas-
tic membrane (A). If you do not remove the
membrane, remaining food can cause a
blockage in the drain hose spigot