Ancor 703023 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ancor 703023. Ancor 703023 12 pagina's. 120v two setting heat gun

OPERATOR'S MANUAL: 120V TWO SETTING HEAT GUN

• Avoid accidental starting. Ensure the switch is in the off position before plugging in.

Carrying power tool with your finger on the switch or plugging in power tools that

have the switch on invites accidents.

• Remove any adjusting keys or wrenches before turning the power tool on. A wrench

or key that is left attached to a rotating part of the tool may result in personal injury.

• Do not overreach. Maintain proper footing and balance at all times. Loss of balance

can cause an injury in an unexpected situation.

• If devices are provided for connection of dust extraction and collection facilities,

ensure these are connected and properly used. Use of these devices can reduced

user related hazards.

• Do not use a ladder or unstable support. Stable footing on a solid surface enables

better control of the tool in unexpected situations.

• Keep tool handles dry, clean and free from oil and grease. Slippery handles cannot

safely control the tool.

TOOL USE/CARE SAFETY

• Secure the work piece. Use clamp or other practical way to hold the work piece to a

stable platform. Holding the work piece by hand or against your body is unstable and

may lead to loss of control.

• Do not force the power tool. The tool will perform the job better and safer at the feed

rate for which it is designed. Forcing the tool could possibly damage the tool and may

result in personal injury.

• Use the correct power tool for the job. Do not force the tool or attachment to do a

job for which it is not designed.

• Do not use tool if switch does not turn it on or off. Any tool that cannot be controlled

with the switch is dangerous and must be repaired or replaced by an authorized

service center.

• Turn power tool off, and disconnect the plug from the power source and/or battery

pack from the power tool before making any adjustments, changing the accessories,

or storing the tools. Such preventive safety measures reduce the risk of an accidental

startup which may cause personal injury.

• Store idle tool out of reach of children and other inexperienced persons. It is

dangerous in the hand of untrained users.

• Maintain power tools with care. Check for proper alignment and binding of moving

parts, component breaks, and any other conditions that may affect the tool's

operation. A guard or any other part that is damaged must be properly repaired

or replaced by an authorized service center to avoid risk of personal injury.

• Use recommended accessories. Using accessories and attachments not

recommended by the manufacturer or intended for use on this type tool may

cause damage to the tool or result in personal injury to the user. Consult the

operator's manual for recommended accessories.

ancorproducts.com | 800.307.6702