Atherton ADE-043A Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Atherton ADE-043A. Atherton ADE-043A 16 pagina's. Ip cam tester

4. Getting Started

Press and hold the power key on the right edge for 2 seconds.

The Tester will start booting up then slide

The START menu will come up, tap on START to proceed.

Press and hold the power key until [Power Off] prompted.

Tap [Power off] and [OK]

The Tester will automatically turn off in a few seconds.

If you cannot shut down your Tester as described above, press and hold the power

key for about 5 seconds to force it to shut down.

6. Turning the Screen On/Off (Sleep Mode)

You can turn off the screen (sleep mode) when you are not using your tester.

Press the power key.

The screen goes to sleep. To deactivate sleep mode and turn on the screen, press

the power key again

You can set the time until the screen automatically goes to sleep when the device

has not been operated for a given amount of time. Tap [Apps & Widgets] - [Settings] -

[Display] - [Sleep], and select the desired time interval before going to sleep

Note. If you will not use the Tester for a long time please turn off (shut down) it.

to unlock the screen.