AND UA-704 Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AND UA-704. AND UA-704 16 pagina's.
Ook voor AND UA-704: Gebruiksaanwijzing (16 pagina's)
Pagina afdrukken
Installing / Changing The Battery
1. Remove the battery cover.
2. Insert a new battery into the
battery compartment as shown,
taking care that the polarities
(+) and (-) are correct.
Use only R6P, LR6, AA or
equivalent battery.
3. Close the battery cover.
CAUTION
Insert the battery as shown in the battery compartment. If not, the device
will not work.
When
(LOW BATTERY mark) blinks in the display, replace with a new
battery.
(LOW BATTERY mark) does not display when the battery is drained.
Battery life varies with the ambient temperature and may be shorter at
low temperatures.
Remove the battery if the device is not to be used for a long time.
The battery may leak and cause a malfunction.
Use the specified battery only. The battery provided with the device is for
testing monitor performance and may have a limited life.
Selecting The Correct Cuff
Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The index
and proper fit range, on the cuff, tell you if you are attaching the
correct cuff. (Refer to "Attaching The Arm Cuff" on next page)
If the index
points outside of the range, contact your local dealer for replacement.
Arm Size
32 cm to 42 cm
22 cm to 32 cm
-
Arm size: The circumference of upper arm at the midpoint between the shoulder and elbow.
Note: This UA-704 monitor is NOT designed for using a small cuff.
Using The Monitor
Recommended Cuff Size
Large cuff
Medium cuff
Small cuff
ENGLISH 5
Battery cover
Battery
Order No.
UA-CUFBLALB
UA-CUFCAULB, UA-CUFDAULB
-