formlabs Form Cure Snelstarthandleiding - Pagina 4

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} formlabs Form Cure. formlabs Form Cure 8 pagina's.

Pagina afdrukken
USING FORM CURE
Set Cure Time and Temperature
3.
Turn the knob to navigate the display menu. Press the knob to select
a feature or setting. Select the time and temperature, then select
"Start." The LEDs will activate once the heater has reached the target
temperature. Once a cure cycle has started, use the display or open
the cover to pause.
POST-CURE SETTINGS
For Standard Resins use default post-cure
settings of 60 °C for 30 minutes.
Proper post-curing requires light and heat. All materials have
unique time and temperature settings for optimal material properties.
Use the space below to note the recommended settings from
.
formlabs.com/cure-support
POST-CURE NOTES
4